PC keeps crashing randomly

I have Windows 7 64-bit with all the latest updates. I have a Gigabyte Z77-D3H motherboard, 8GB of DDR3 RAM, intel i5 2500k CPU, EVGA Geforce GTX 570 videocard

My video drivers are up to date, all drivers are up to date. I get a blue screen randomly and the computer reboots. Here's the log from Windows:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP2: 0000000000000000
BCP4: 0000000000000007
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Anyone have any idea? I ran memtest86 and no problems.
7 answers Last reply
More about crashing randomly
  1. Possibly one or more bad RAM modules. Test them with memtest86+ which runs from a bootable CD: http://www.memtest.org/.
    Download the Pre-Compiled Bootable ISO (.zip), extract the ISO file and create a CD from it with IMGBurn: http://www.filehippo.com/download_imgburn/

    Boot your faulty PC from that CD to launch the memory testing software.
  2. Yeah, i already did memtest86 and nothing showed up
  3. Have you tried a system restore ? How long has this been going on ? Was there a time when it did not crash ?
  4. It's been going on since I built this system. Can't quite figure it out.
  5. try this and see what it will report http://www.resplendence.com/whocrashed
  6. I keep getting this. THis is from WhoCrashed. Does anyone know what this means? Or can point out a section of this forum or another forum that has people who know? I'm getting desperate.

    On Thu 11/1/2012 5:20:25 PM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\110112-24024-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x7EFC0)
    Bugcheck code: 0xA (0xFFFFFA8025D25010, 0x2, 0x1, 0xFFFFF8000F73C376)
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
  7. see this for the dispatch level http://msdn.microsoft.com/en-us/library/windows/hardware/ff554368%28v=vs.85%29.aspx use this and check all your driver one could make conflict with another ,also install the plug in i use the translator for this page http://translate.google.ca/translate?hl=fr&sl=fr&tl=en&u=http%3A%2F%2Ftouslesdrivers.com%2F
Ask a new question

Read More

Windows 7