I am finally getting this thing back together and its doing things i didn't see before. Its a XP1700+ palamino on a GA7DXR+ mobo. I had to replace my little 300watt p/s with a 460. It had a blown cap. anyway .. Iset my raid up with 2 wd30's and windows xp pro.i started playing with voltage and clock speeds and ram settings in the bios. Now this reads as a xp2000+ @1640. most of this was by setting the external clock. I don't seem to be able to set the multiplier for some reason. I could use a little insight if possible.I have read some about palamino's and t-bids and everyone seems to be on a different sheet of music. Everything is running fine and i have only seen the temp go as high as 48c. I would like a little more out of this if possible.... SOMEONE???????????? I am fairly new to this stuff but i'm not an idiot!!!!!!
did you raise the fsb? and no you cant change the multiplier, its locked
<font color=red> black </font color=red> <font color=green> white </font color=green> <font color=blue> yellow </font color=blue> <font color=orange> purple </font color=orange> <font color=black> red </font color=black> <font color=yellow> green </font color=yellow> <font color=purple> blue </font color=purple>
<font color=red> black </font color=red> <font color=green> white </font color=green> <font color=blue> yellow </font color=blue> <font color=orange> purple </font color=orange> <font color=black> red </font color=black> <font color=yellow> green </font color=yellow> <font color=purple> blue </font color=purple>
yes i raised the fsb but could only keep it stable up to 149. Maybe if i get some cooling tabs on my memory i can keep it a bit more stable. I don't know for sure, But I am having fun playing with this. I really wish They would hurry up and get my other mobo back to me. A-Bit BE6II v 2.
I have a PIII 600eb just anxious to get back to work. That is a great system too. At least for a po'boy LOL
I have a PIII 600eb just anxious to get back to work. That is a great system too. At least for a po'boy LOL
khha4113
Distinguished
- Dec 31, 2007
- 2,143
- 0
- 19,780
AFAIK, Palomino can't overclock too high. I used to have XP1600+ on Abit KX7-333R. I could run it as high as 168MHz FSB but couldn't get it run stable at higher than 1680MHz no matter what I tried. Anyway, your mobo is AMD760, and it can't run FSB too high (I also have Abit KG7-RAID AMD760 chipset too and it cannot even post at 150MHz FSB with Palomino XP1600+).
Good or Bad have no meaning at all, depends on what your point of view is.
Good or Bad have no meaning at all, depends on what your point of view is.
Facebook
Twitter
Instagram