I keep getting these blue screens that i don't know how to fix, they happen like every 10 minutes or something, i keep getting this report from bluescreen viewer, can someone fix this for me? :
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
*** ntoskrnl.exe - Address 0xfffff8000329bf90 base at 0xfffff8000321d000 DateStamp
Edit: i ran perfmon and i got this report: Symptom: Missing Events in Event Log
Details: Investigate why 39% (39,707) events were lost during data collection. The settings for Event Tracing for Windows (ETW) maximum buffers and buffer size may not be optimal depending on which data sets are being collected.
Also i want to add reports from all these other programs but i don't know how to attach them
And here are my specs: Psu: Antec VP550P 550W Power Supply
Ram: G.Skill Ares F3-1600C9D-8GAO 8GB (2x4GB) DDR3
Cpu: Intel Core i5 3550
Gpu: Gigabyte Radeon HD7850 2GB OC
Hdd: Seagate Barracuda 500GB ST500DM002
Mobos: ASRock B75M Motherboard
Os: windows 7 professional
what should i change the core voltage to? Currently it is on auto. Also i'm not sure if it was reinstalling the gpu drivers that fixed the bsod, because when i had it uninstalled and was downloading the driver installer from the net i got bsod multiple times. Also, my temps right now are:
systin: 25 degrees celcius
and my cpu cores are around 30
okay, i got another bluescreen, upping it to +100mv . this time caused by ntoskrnl.exe
EDIT: still got a bluescreen, gonna try upping to voltages to my gpu seeing as +100mv seems to be the highest
EDIT2: didn't get a bluescreen, but i did get a pure black screen, gonna try upping gpu voltages by +100mv, is there anything else i should increase?
Edit3:got another bluescreen, it seems a sure fire way to get a blue screen is to play saints row the third for a bit. Not sure what to do now. I set the voltages back to auto.
Next check your disk for errors.
'Start', type cmd Rt click CMD in Programs, 'Run as administrator'
type chkdsk /f/r then Enter (Note space after chkdsk)
Could take a while, and may want to run on next restart
Note exit codes if poss
I set it to do a disk check but when i restart it and it's starting to do the disk check, it says it can't because of an error caused by some newly installed thing, i couldn't read the rest of it because it flashed too fast for me to see. I do know there was some code there though.
Hmmm. Starting to look like a disk problem or a corrupt Windows Install. Check disk 1st as re-install a pain...(Upgrade to Win 8 and hope it solves the problem, plus Win 8 has a 'Refresh Windows' option that re-installs core components of Windows without losing your data...)
Try running Seatools for Windows http://www.seagate.com/support/downloads/