Plasma tv help?

I have a Panasonic TH-42PWD4 42" Plasma Television with a serious red tint when watching video from any input. This tint does NOT show up when in menu. Any idea what component would cause this?
4 answers Last reply
More about plasma help
  1. If I had to take a stab in the wind I would say that your DG board is going south... Open her up and check the cable that runs from the DG board to the D-board and make sure its tight. DG board failures fairly common on the Pana's
  2. SmurfOnABoat said:
    If I had to take a stab in the wind I would say that your DG board is going south... Open her up and check the cable that runs from the DG board to the D-board and make sure its tight. DG board failures fairly common on the Pana's


    please keep in mind that I am no tv repairman as you read my response...

    I pulled the back cover to do as you said. I have been crossing the numbers on the boards to determine what they are (by searching the internet). Of all of the bigger boards, nothing comes back as a DG board. I have a power supply board, ss board, j board, d board, and a sc board. Also, several smaller boards that I did not research yet. This tv was formerly used as a lobby monitor at a tv station (just showed their logo all the time). Could this be some different (commercial?) type of tv? Any more suggestions or ideas?

    thanks,
    John
  3. The DG board is the main board, that has all the video inputs attached to it, all the other boards attach to this board. May also be the AV board.
Ask a new question

Read More

Digital TV TV Panasonic Home Theatre