Archived from groups: rec.games.pinball (
More info?)
Found it. The red wire that runs to the relay boards was burned through in
a spot. Took some searching but got it fixed. Now I have to figure out why
it loads two balls sometimes int he left center kicker and on that right
side kicker. It seems to never load anything in the right center kicker.
But the kicker works if I drop a ball in it. The machine never seems to
actuate the upper diverter but it tests out in the tests. It seems like it
just activates the bottom diverter each time or none at all. If I lock ball
1 in the right side kicker and ball 2 in the left center kicker, it then
repeats into one of these instead of loading the right center kicker.
This is my first System 11 pin and it's been a lot of fun so far. Lots to
figure out since I bought a project.
--
-Frank Gant
http://orbitpinball.com
"Otto" <ottondebremove&%$*@bellsouth.net> wrote in message
news:NTiAe.57334$Tt.30221@bignews3.bellsouth.net...
> Voltage at the coil lugs?
>
> Wires connected?
>
> Otto
>
> CARGPB11
>
> My web page:
http://home.bellsouth.net/p/PWP-Ottoslanding
>
> "OrbitPinball.com" <orbitpinball@cox.net> wrote in message
> news:_QiAe.16061$fV.12569@okepread06...
>> They don't fire in test.
>
>