EBD Overlay project

Toggle sidebar Toggle sidebar
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

One of the games I picked up once had duct tape where an insert used to
be. Did it's job of stopping the ball from falling through... I
guess...
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Big job, but it's looking good so far. It will be interesting to see
the results. How accurate is the overlay? It couldn't be worse than
what you started with.
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

where'd you get the overlay and how much was it?

stevebo


On Mon, 11 Jul 2005 02:56:36 GMT, bogart <pinrestore@gmail.com> wrote:

>I just put up some pics of my EBD overlay project here:
>http://pinrestore.com/coppermine/thumbnails.php?album=10&page=1
>
>Two more coats of polyurethane and I'll be ready to float that big sticker!
>
>bogart
>www.pinrestore.com
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Normally I get sad when people sand off perfectly restorable playfields
to sticker, but...

Your EBD field gets the "Ow, my frickin' eyes" award for the week.

--Chris
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Me too. I explored touchup but when that much of the main part of the
playfield is just wood, and splintery rough wood at that, there's not a
lot than can be done without overspending the value of the game. I was
hoping for a Canadian playfield repro but we all know which hole that
enterprise fell into!

Also, almost every one of the pool ball light inserts in the lower PF
was loose enough to fall out when the PF was turned over! I used almost
a whole 2 oz bottle of thin CA getting those back in tight!

bogart
www.pinrestore.com

Chris Lyon wrote:
> Normally I get sad when people sand off perfectly restorable playfields
> to sticker, but...
>
> Your EBD field gets the "Ow, my frickin' eyes" award for the week.
>
> --Chris
>
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

It's from Fabulous Fantasies, $200.
http://www.fabfan.com/new.html

bogart
www.pinrestore.com

Steve C wrote:
> where'd you get the overlay and how much was it?
>
> stevebo
>
>
> On Mon, 11 Jul 2005 02:56:36 GMT, bogart <pinrestore@gmail.com> wrote:
>
>
>>I just put up some pics of my EBD overlay project here:
>>http://pinrestore.com/coppermine/thumbnails.php?album=10&page=1
>>
>>Two more coats of polyurethane and I'll be ready to float that big sticker!
>>
>>bogart
>>www.pinrestore.com
>
>
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

The overlay seems to be bang-on in my test fits. It does seem to be a
darker color scheme than the original PF. My game is a very early one,
it came with the white bumper caps and red posts. I suppose there were
more than one run of PFs done as there were a lot of EBDs made.

bogart
www.pinrestore.com

Kenbo wrote:
> Big job, but it's looking good so far. It will be interesting to see
> the results. How accurate is the overlay? It couldn't be worse than
> what you started with.
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Visit www.pinballmagic.com/overlay.htm for more info on overlays..


"Steve C" <steve@stevechannel.com> wrote in message
news:nc94d1h4j1349e1qfm6ir8e9h8rf0sn0rb@4ax.com...
> where'd you get the overlay and how much was it?
>
> stevebo
>
>
> On Mon, 11 Jul 2005 02:56:36 GMT, bogart <pinrestore@gmail.com> wrote:
>
>>I just put up some pics of my EBD overlay project here:
>>http://pinrestore.com/coppermine/thumbnails.php?album=10&page=1
>>
>>Two more coats of polyurethane and I'll be ready to float that big
>>sticker!
>>
>>bogart
>>www.pinrestore.com
>
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Absolutely!

Your guide has been a great help in finally getting this done. Thanks
again for providing such a comprehensive tutorial on the subject. I even
found the Lemon Chiffon paint in the Crafts section at Sprawl-Mart for
44 cents. It's close enough right out of the bottle, especially when you
consider all that area is covered by the upper arch plastics.

bogart
www.pinrestore.com


Pinball Magic wrote:
> Visit www.pinballmagic.com/overlay.htm for more info on overlays..
>
>
> "Steve C" <steve@stevechannel.com> wrote in message
> news:nc94d1h4j1349e1qfm6ir8e9h8rf0sn0rb@4ax.com...
>
>>where'd you get the overlay and how much was it?
>>
>>stevebo
>>
>>
>>On Mon, 11 Jul 2005 02:56:36 GMT, bogart <pinrestore@gmail.com> wrote:
>>
>>
>>>I just put up some pics of my EBD overlay project here:
>>>http://pinrestore.com/coppermine/thumbnails.php?album=10&page=1
>>>
>>>Two more coats of polyurethane and I'll be ready to float that big
>>>sticker!
>>>
>>>bogart
>>>www.pinrestore.com
>>
>
>
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

I'm glad it helped! The pictures of your overlay look great!


"bogart" <pinrestore@gmail.com> wrote in message
news:jBGAe.2309$dU3.79@newsread2.news.pas.earthlink.net...
> Absolutely!
>
> Your guide has been a great help in finally getting this done. Thanks
> again for providing such a comprehensive tutorial on the subject. I even
> found the Lemon Chiffon paint in the Crafts section at Sprawl-Mart for 44
> cents. It's close enough right out of the bottle, especially when you
> consider all that area is covered by the upper arch plastics.
>
> bogart
> www.pinrestore.com
>
>
> Pinball Magic wrote:
>> Visit www.pinballmagic.com/overlay.htm for more info on overlays..
>>
>>
>> "Steve C" <steve@stevechannel.com> wrote in message
>> news:nc94d1h4j1349e1qfm6ir8e9h8rf0sn0rb@4ax.com...
>>
>>>where'd you get the overlay and how much was it?
>>>
>>>stevebo
>>>
>>>
>>>On Mon, 11 Jul 2005 02:56:36 GMT, bogart <pinrestore@gmail.com> wrote:
>>>
>>>
>>>>I just put up some pics of my EBD overlay project here:
>>>>http://pinrestore.com/coppermine/thumbnails.php?album=10&page=1
>>>>
>>>>Two more coats of polyurethane and I'll be ready to float that big
>>>>sticker!
>>>>
>>>>bogart
>>>>www.pinrestore.com
>>>
>>
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom