TECH: solenoid wiring

[Guest]

Archived from groups: rec.games.pinball (More info?)

Hi,

Does it make any difference the way wires are hooked up on single coil
solenoids with no diode, I don't think it does but would just like to know,
thanks.

Kevin

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

It makes no difference as long as no diode is there.

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Not at all. Although not required,
it is still good practice to try
and solder the 'hot' side wire to the
same side as it is done to other coils
in the game.

It will help you develop good repair
techniques and skills.

Fred
TX
CARGPB#8
====================

Sojourner353 wrote:
> Hi,
>
> Does it make any difference the way wires are hooked up on single coil
> solenoids with no diode, I don't think it does but would just like to know,
> thanks.
>
> Kevin

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Thanks for that, I didn't think it did, I must have a coil on its way
out then.

Kevin

"Fred Kemper" <pbgarage@hotmail.com> wrote in message
news:1121435839.841049.55770@g47g2000cwa.googlegroups.com...
> Not at all. Although not required,
> it is still good practice to try
> and solder the 'hot' side wire to the
> same side as it is done to other coils
> in the game.
>
> It will help you develop good repair
> techniques and skills.
>
> Fred
> TX
> CARGPB#8
> ====================
>
> Sojourner353 wrote:
>> Hi,
>>
>> Does it make any difference the way wires are hooked up on single
>> coil
>> solenoids with no diode, I don't think it does but would just like to
>> know,
>> thanks.
>>
>> Kevin
>