Tom's Hardware > Forum > Games General > Games General Discussions > More stupid F-14 questions

More stupid F-14 questions

Forum Games General : Games General Discussions - More stupid F-14 questions

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Anonymous   07-17-2005 at 06:46:18 AM

Archived from groups: rec.games.pinball (More info?)

 

I just bought an audio board for my (audio-boardless) f-14. I didn't
pay too much attention (my fault obviously) to what i was buying and
it's actually a D-11298 Sound board with F-14 roms on it.

the 11298 is apparently the sound board used in Pinbot, Road Kings and
space station. F-14 used a D-1581. I can't find any information about
the 2 being interchangable. But if not WHY WOULD SOMEONE BE SELLING IT
WITH THE F-14 ROMS ON IT!!!

Well, when i started wriging this I had more than 1 question....but now
I don't remember what else I had. I'm sure after I wake up in the AM
I'll be refreshed and have more bothersome questions.

TIA

Allroy

Add a reply
Sponsored Links
Register or log in to remove.
Anonymous   07-17-2005 at 10:26:02 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

Ahh, an all nighter in the pinball shop and now your brain dead. Been
there, done that. Now's a good time to stop before you brake something.

Allroy1975_@_yahoo.com wrote:
> I just bought an audio board for my (audio-boardless) f-14. I didn't
> pay too much attention (my fault obviously) to what i was buying and
> it's actually a D-11298 Sound board with F-14 roms on it.
>
> the 11298 is apparently the sound board used in Pinbot, Road Kings and
> space station. F-14 used a D-1581. I can't find any information about
> the 2 being interchangable. But if not WHY WOULD SOMEONE BE SELLING IT
> WITH THE F-14 ROMS ON IT!!!
>
> Well, when i started wriging this I had more than 1 question....but now
> I don't remember what else I had. I'm sure after I wake up in the AM
> I'll be refreshed and have more bothersome questions.
>
> TIA
>
> Allroy
>

Reply to Anonymous
Anonymous   07-17-2005 at 04:06:56 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

yep, and now I've been so busy cleaning the house that I can't remember
what I was doing last night. All I know is I have a bunch of boards on
the PF glass that I don't have screws to mount with...SO I gotta get
the the Hardware store today and get some screws.

So my one and only question still stands. Will that oddball sound
board work for me? or do I need the original? Looking at the Marvin3M
site and can't figure it out. :(

HELP! before I blow something up. or hopefully not ;)

Allroy

Reply to Anonymous
otto   07-17-2005 at 07:21:06 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

I am not familiar with that system but are you sure the screws aren't still
in the head?

On the Wpc games, the screws are simply loosened and then the board is
raised and lifted out with the screws still in place on the standoffs.


Otto

CARGPB11

My web page: http://home.bellsouth.net/p/PWP-Ottoslanding

"Allroy1975_@_yahoo.com" <mathewtdavis@gmail.com> wrote in message
news:1121620016.797016.98920@g43g2000cwa.googlegroups.com...
> yep, and now I've been so busy cleaning the house that I can't remember
> what I was doing last night. All I know is I have a bunch of boards on
> the PF glass that I don't have screws to mount with...SO I gotta get
> the the Hardware store today and get some screws.

Reply to otto
Anonymous   07-17-2005 at 04:25:21 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

yeah, the game was missing these boards:
audio
Power
Score display

There were 3 of the 4 screws in the score display but even the MPU that
was there, wasn't held in by anything. I need 18 screws. :)

Allroy

Reply to Anonymous
Anonymous   07-18-2005 at 02:04:06 AM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

anyone?
someone must know enough about the difference between these two boards.
Maybe I should have posted with a more "problem-specific" header...

Allroy

Reply to Anonymous
Anonymous   07-21-2005 at 12:13:39 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

hi

u4 and u19 sound eproms are the same 32k / piece as from pinbot
schematis are the same d11298 has an extra SR but this is not
big deal
conclusion the board should work in your F14
conect the board to the machine with no fear !!!

Marius

www.pinball.ro

Reply to Anonymous
Anonymous   07-21-2005 at 01:35:07 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

Otto wrote:
> I am not familiar with that system but are you sure the screws aren't still
> in the head?
>
> On the Wpc games, the screws are simply loosened and then the board is
> raised and lifted out with the screws still in place on the standoffs.

Nope; that was one of the enhancements for wpc: slotted screw holes.

Reply to Anonymous
Anonymous   07-22-2005 at 04:11:25 AM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

oops...forgot to write and say thanks!

Allroy

Reply to Anonymous
Ask the community Add a reply
Tom's Hardware > Forum > Games General > Games General Discussions > More stupid F-14 questions
Go to:

There are 1283 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.918 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them