Tech: part number needed for screw/post

[devon]

Archived from groups: rec.games.pinball (More info?)

Can someone tell me what these are called or a part number for them . I
can't find anything in the manual for all these misc. screws, nuts, washers.

This one broke in half right at where the top threading ends - It's about 2
3/4 inches long, threaded - smooth, then threaded.

Here's a pic
http://www.pacificnet.net/~dirwin/pinball/mm_screw.jpg

It is for the left slingshot cover and goes through the playfield and the
threaded side is where the under-playfield left "handle" is attached with at
nut ( the right side of the pic. )

thanks,

devon

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Devon ... should be 02-4425-3 or 02-4425-1 as I checked in MM parts lookup
www.bayareaamusements.com/embedded, if you look there and check MM for the
search and then 02-44 (which will search for mostly posts), then you will
see:

1 02-4425-1 post fastner 8-32/8-32x5/8top MM
12 02-4425-2 post fastner 8-32/8-32x9/32top MM
1 02-4425-3 "post fast 8-32/8-32x5/8top 2""l" MM

Looking at the site on the picture, not sure if it's the -1 or -3 (we
have -3 in stock, and temporarily out of the -1.

rick@bayareaamusements.com

"devon" <1papadudeNOSPAM@NOSPAMverizon.net> wrote in message
news:eXgDe.35514$Tx1.12832@trnddc03...
> Can someone tell me what these are called or a part number for them . I
> can't find anything in the manual for all these misc. screws, nuts,
> washers.
>
> This one broke in half right at where the top threading ends - It's about
> 2 3/4 inches long, threaded - smooth, then threaded.
>
> Here's a pic
> http://www.pacificnet.net/~dirwin/pinball/mm_screw.jpg
>
> It is for the left slingshot cover and goes through the playfield and the
> threaded side is where the under-playfield left "handle" is attached with
> at nut ( the right side of the pic. )
>
> thanks,
>
> devon
>
>
>
>
>

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Devon I believe Rick is correct, the parts lookup that you can find on
his site and other places suggests that you need the 02-4225-3 which
does measure out to 2 3/4". You say it broke on the top threading, but
your picture suggests otherwise. Top thread on the -3 part is 5/8",
bottom thread is 13/16". The -3 I have in stock has a smaller looking
hex section, I don't think that will make a difference. Dave

Bay Area Amusements LLC wrote:
>
> Devon ... should be 02-4425-3 or 02-4425-1 as I checked in MM parts lookup
> www.bayareaamusements.com/embedded, if you look there and check MM for the
> search and then 02-44 (which will search for mostly posts), then you will
> see:
>
> 1 02-4425-1 post fastner 8-32/8-32x5/8top MM
> 12 02-4425-2 post fastner 8-32/8-32x9/32top MM
> 1 02-4425-3 "post fast 8-32/8-32x5/8top 2""l" MM
>
> Looking at the site on the picture, not sure if it's the -1 or -3 (we
> have -3 in stock, and temporarily out of the -1.
>
> rick@bayareaamusements.com
>
> "devon" <1papadudeNOSPAM@NOSPAMverizon.net> wrote in message
> news:eXgDe.35514$Tx1.12832@trnddc03...
> > Can someone tell me what these are called or a part number for them . I
> > can't find anything in the manual for all these misc. screws, nuts,
> > washers.
> >
> > This one broke in half right at where the top threading ends - It's about
> > 2 3/4 inches long, threaded - smooth, then threaded.
> >
> > Here's a pic
> > http://www.pacificnet.net/~dirwin/pinball/mm_screw.jpg
> >
> > It is for the left slingshot cover and goes through the playfield and the
> > threaded side is where the under-playfield left "handle" is attached with
> > at nut ( the right side of the pic. )
> >
> > thanks,
> >
> > devon
> >
> >
> >
> >
> >

--

Dave Mercer
For Amusement Only
943 Butte Pass Dr
Fort Collins, CO 80526
970-282-8282
970-223-2372 fax
Paypal payments can be made to
paypal@foramusementonly.to
Please visit our website for your pinball needs
http://www.foramusementonly.to

 

[devon]

Archived from groups: rec.games.pinball (More info?)

"Bay Area Amusements LLC" <rick@bayareaamusements.com> wrote in message
news:SZGdnazGSZazAkDfRVn-2w@comcast.com...
> Devon ... should be 02-4425-3 or 02-4425-1 as I checked in MM parts
> lookup
> www.bayareaamusements.com/embedded, if you look there and check MM for the
> search and then 02-44 (which will search for mostly posts), then you will
> see:
>
> 1 02-4425-1 post fastner 8-32/8-32x5/8top MM
> 12 02-4425-2 post fastner 8-32/8-32x9/32top MM
> 1 02-4425-3 "post fast 8-32/8-32x5/8top 2""l" MM
>
> Looking at the site on the picture, not sure if it's the -1 or -3 (we
> have -3 in stock, and temporarily out of the -1.
>
> rick@bayareaamusements.com
>
Thanks Rick -

Actually I had the pic wrong - see if this helps -

http://www.pacificnet.net/~dirwin/pinball/mm_screw1.jpg

thanks,
devon