LF: Fish Tales stuff

[Dad]

Archived from groups: rec.games.pinball (More info?)

I am looking for the front plastic from the casters club(or two), as well as
the thin plastic from the right side of the boat.

I also need some capacitors, but I expect these will be easier to find
locally at the electronics shop...they are after all only caps? right?

I could also use a coin door interface board, and a flipper opto board as
well...

Thanks!

Chris

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Try these web sites for your plastics. They may have the other parts as
well.

Pinball universe
http://www.pinballuniverse.com/fishtalesparts.htm

Bay Area Amusements
http://bayareaamusements.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=GS-FT

Good luck
Rich Wiski

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

We have the thin pieces on either side of the boat- Alan Meyer's excellent
reproductions. Only a few left of the right side tho- they sell the
fastest.

And we have new flipper opto boards in stock- old and new styles. We carry
the large filter caps for the power driver boards in these games- they are
the most commonly replaced.

Lots of other goodies, too- see: www.actionpinball.com for pictures, prices,
and online ordering.

Hope that helps!

Ray J.
--
Action Pinball & Amusement, LLC
Salt Lake City, Utah USA
Web: www.actionpinball.com

We're serious about pinball. Anything else is just for fun!



"DaD" <tabby238N@SPAMhotmail.com> wrote in message
news:fZudnama-tByGkPfRVn-jw@golden.net...
> I am looking for the front plastic from the casters club(or two), as well
as
> the thin plastic from the right side of the boat.
>
> I also need some capacitors, but I expect these will be easier to find
> locally at the electronics shop...they are after all only caps? right?
>
> I could also use a coin door interface board, and a flipper opto board as
> well...
>
> Thanks!
>
> Chris
>
>

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Ray, do you expect to have the boat plastic in soon? i would like to
buy the full set.

-c

 

[Dad]

Archived from groups: rec.games.pinball (More info?)

OHHH!

I could use scans of the instruction cards as well, if anyone has scanned
these in the past!

Thanks!

Chris

 

[Dad]

Archived from groups: rec.games.pinball (More info?)

I saw that, thanks, but I was only actually looking for a few..the whole kit
is 129..I don't wanna make my fishtales worth that much, lol


<rwiski@advantexmail.net> wrote in message
news:1121881006.092721.265750@z14g2000cwz.googlegroups.com...
> Try these web sites for your plastics. They may have the other parts as
> well.
>
> Pinball universe
> http://www.pinballuniverse.com/fishtalesparts.htm
>
> Bay Area Amusements
> http://bayareaamusements.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=GS-FT
>
> Good luck
> Rich Wiski
>

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

No plans currently in the works for the boat plastic, but I expect we'll
have more at some point- these are Alan Meyer's repros and he's done a few
runs of them in past years, so likely we'll have more again at some point.
I'll add your contact info to our waiting list and drop you a note when
they're available again.

Ray J.
--
Action Pinball & Amusement, LLC
Salt Lake City, Utah USA
Web: www.actionpinball.com

We're serious about pinball. Anything else is just for fun!



"CraigC -Chicago-" <pinball@chicagohardcore.net> wrote in message
news:1121886056.670693.274150@f14g2000cwb.googlegroups.com...
> Ray, do you expect to have the boat plastic in soon? i would like to
> buy the full set.
>
> -c
>

 

[WoodtDykott]

Archived from groups: rec.games.pinball (More info?)

No plans currently in the works for the boat plastic, but I expect we'll
have more at some point- these are Alan Meyer's repros and he's done a few
runs of them in past years, so likely we'll have more again at some point.
I'll add your contact info to our waiting list and drop you a note when
they're available again.

Ray J.
--
Action Pinball & Amusement, LLC
Salt Lake City, Utah USA
Web: www.actionpinball.com

We're serious about pinball. Anything else is just for fun!



"CraigC -Chicago-" <pinball@chicagohardcore.net> wrote in message
news:1121886056.670693.274150@f14g2000cwb.googlegroups.com...
> Ray, do you expect to have the boat plastic in soon? i would like to
> buy the full set.
>
> -c
>

 

[WoodtDykott]

Pleazse add me to the waiting list also. I need the boat plastics.
===================================

Archived from groups: rec.games.pinball (More info?)

No plans currently in the works for the boat plastic, but I expect we'll
have more at some point- these are Alan Meyer's repros and he's done a few
runs of them in past years, so likely we'll have more again at some point.
I'll add your contact info to our waiting list and drop you a note when
they're available again.

Ray J.
--
Action Pinball & Amusement, LLC
Salt Lake City, Utah USA
Web: www.actionpinball.com

We're serious about pinball. Anything else is just for fun!



"CraigC -Chicago-" <pinball@chicagohardcore.net> wrote in message
news:1121886056.670693.274150@f14g2000cwb.googlegroups.com...
> Ray, do you expect to have the boat plastic in soon? i would like to
> buy the full set.
>
> -c
>