Archived from groups: alt.sys.pc-clone.dell (More info?)
Has anyone had any experience with the 7200 RPM laptop hard drives? I was
thinking about buying one and was wondering if I may see a significant
performance increase.
Archived from groups: alt.sys.pc-clone.dell (More info?)
Kevin wrote:
> Has anyone had any experience with the 7200 RPM laptop hard drives? I was
> thinking about buying one and was wondering if I may see a significant
> performance increase.
>
>
> Kevin
I went up from a 4200 to a 5400 a few months ago and got a little bit of in
increase. The 7200rpm 60g's were $300 and I got the 5400rpm for $120.
Archived from groups: alt.sys.pc-clone.dell (More info?)
"Kevin" <kmiles520@directus.com> wrote in message
news:10a1goftll3fv26@corp.supernews.com...
> Has anyone had any experience with the 7200 RPM laptop hard drives? I was
> thinking about buying one and was wondering if I may see a significant
> performance increase.
>
I purchased my Inspirion with the 7200 and compared to my last laptop
with the 5400, HD performance has increased by about 20 to 30
percent.
I have to say though, it is definately hot on the top of the legs though.
No burns but a little uncomfortable.
Archived from groups: alt.sys.pc-clone.dell (More info?)
moncho wrote:
>
> "Kevin" <kmiles520@directus.com> wrote in message
> news:10a1goftll3fv26@corp.supernews.com...
> > Has anyone had any experience with the 7200 RPM laptop hard drives? I was
> > thinking about buying one and was wondering if I may see a significant
> > performance increase.
> >
>
> I purchased my Inspirion with the 7200 and compared to my last laptop
> with the 5400, HD performance has increased by about 20 to 30
> percent.
>
> I have to say though, it is definately hot on the top of the legs though.
> No burns but a little uncomfortable.
Putting any laptop on your lap is, despite what the word "laptop" implies,
not a good idea.
In addition to the physical discomfort, which you mention, your legs tend
to block cooling fans/ports, causing the unit to run hotter than intended,
in turn, causing higher failure rates.
Archived from groups: alt.sys.pc-clone.dell (More info?)
"Lawrence Glasser" <lglasser@spamcop.net> wrote in message
news:40A2505C.3C5CA23@spamcop.net...
> moncho wrote:
> >
> > "Kevin" <kmiles520@directus.com> wrote in message
> > news:10a1goftll3fv26@corp.supernews.com...
> > > Has anyone had any experience with the 7200 RPM laptop hard drives? I
was
> > > thinking about buying one and was wondering if I may see a significant
> > > performance increase.
> > >
> >
> > I purchased my Inspirion with the 7200 and compared to my last laptop
> > with the 5400, HD performance has increased by about 20 to 30
> > percent.
> >
> > I have to say though, it is definately hot on the top of the legs
though.
> > No burns but a little uncomfortable.
>
> Putting any laptop on your lap is, despite what the word "laptop" implies,
> not a good idea.
>
> In addition to the physical discomfort, which you mention, your legs tend
> to block cooling fans/ports, causing the unit to run hotter than intended,
> in turn, causing higher failure rates.
Unfortunately, there are times when I am cooped up in awkward
situations where the lap is the only possbile choice. At home, I use
a balsa wood board to put on my lap that acts as a desk. The drive
can actually get warm through the wood.
Fortunately, the thing I like about the Inspirion 8600 is there is a fan on
the
side of the laptop and the fan on the bottom is also near the side with
vents
point to the left. This helps a little but still gets a little warm.
Archived from groups: alt.sys.pc-clone.dell (More info?)
"Kevin" <kmiles520@directus.com> wrote:
>Has anyone had any experience with the 7200 RPM laptop hard drives?
We yanked the original drive from my wife's new Latitude D600 and
plugged in a 60G 7200RPM drive, so I can't tell you how the
performance changed. However, she's finding it uncomfortably warm at
times, and may downgrade. I'll be putting it in mine, as I'd rather
have speed over coolth/battery life any day. 8*)
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.