Archived from groups: rec.games.pinball (
More info?)
Thanks Lloyd,
I took a look in the manual, I couldn't find any reference to the fuses.
I'll take another look.
I guess I could always start with the 1 amp fuses and see which 2 blow
.
The game is still in many pieces so it will be a while before I get to test
the fuses.
Interestingly the game came with 10 amp fuses in all three positions.
Steve
"Lloyd Olson" <ltg@ssbilliards.com> wrote in message
news
_ednUYtyrVtFXjfRVnysg@skypoint.com...
> You'll have to follow the wires around or pull a fuse and see what isn't
on
> to figure out which fuse is which. Two are 10 amp for playfield lites, one
> is a 1 amp for solenoids. LTG
>
> "Lloyd Olson" <ltg@ssbilliards.com> wrote in message
> news:t4adndJ7w7QpGHjfRVnyhg@skypoint.com...
> > If you have a manual for your game, it should be in there. LTG
> >
> > "Steve Vassiliadis" <olivuts@yahooX.com> wrote in message
> > news:NvfFe.3458$PL5.331663@news.xtra.co.nz...
> > > Can anyone let me know where I can find details of fuse sizes and what
> > each
> > > fuse feeds for the 3 fuses mounted under the playfield.
> > >
> > >
> > >
> > > --
> > > Remove the X from the email address to email me
> > >
> > >
> >
> >
>
>