With tons of reading the barton 2500 with this stepping should be able to do the 200mhz clock speeds with 2200mhz but my comp has been doin some odd crashes. It will boot into windows ok but either when loading a game of closing a game I'll get the blue screen. During the game it runs great. I couldnt do the benchmark 2001se even in stock setting but the games runs fine at that the stock setting. I believe that this a compatibility issue.
For this CPU, what should my voltage be for 200mhz clock cycle? I just put it at 1.8 volts today but havent tested it yet. Since Im using the slk947u and the tornado 92mm fan, my cpu temp has yet to break 50c. Any other ideas and suggestions would be great. Thanks...
Just had a wierd idea here. Since Ive been trying to achieve 200mhz, that means ive been hitting 40mhz in the pci bus and thats too high. Im aware of wat the clock should be at but on the A78X-Deluxe, where do you adjust the pci bus?
I thought that the nforce 2 chipsets autolock the pci and agp to 33mhz no matter wat you push the fsb, but leave it to the mobo companies to put jumpers or bios setting to change that. The friggin manual as useless it is does not have and info in this topic. Id bet if I set the fsb to 190 itll be stable but Id rather have 200.
Looks like either I have a bad ram slot or a bad ram chip. I did the memtest86 and it made over 160000+ errors on test 5 and 27 on test 6. All errors were with tests that exceeded 514mb. I need to research this over but any info yalll have on this would be great.