Test Mode Road Show

[natty]

Archived from groups: rec.games.pinball (More info?)

Hi,
When I enter test mode in Road Show the manual says that when testing
each solenoid or switch that when I get to that number in the test that
that particular piece of equipment should react. I put it in "running"
mode, start and stop mode but nothing ever pulses. How do I get them
to test? I particularly want to test the right rear diverter. Please
help.
Thanks.

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

The interlock switch on the coin door needs to be closed before the coils
will fire. Opening the coin door kills the +50 volts to the PF

Press the top switch in and try your coil test again..



--
http://www.myhomegameroom.com


"Natty" <oldefortpub@hotmail.com> wrote in message
news:1122665867.822887.234720@f14g2000cwb.googlegroups.com...
> Hi,
> When I enter test mode in Road Show the manual says that when testing
> each solenoid or switch that when I get to that number in the test that
> that particular piece of equipment should react. I put it in "running"
> mode, start and stop mode but nothing ever pulses. How do I get them
> to test? I particularly want to test the right rear diverter. Please
> help.
> Thanks.
>

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

You have a high power interlock switch on the coin door, hold that in ( or
pull out to lock on if it's that style switch ) to enable the high power to
solenoids and flashers. LTG

"Natty" <oldefortpub@hotmail.com> wrote in message
news:1122665867.822887.234720@f14g2000cwb.googlegroups.com...
> Hi,
> When I enter test mode in Road Show the manual says that when testing
> each solenoid or switch that when I get to that number in the test that
> that particular piece of equipment should react. I put it in "running"
> mode, start and stop mode but nothing ever pulses. How do I get them
> to test? I particularly want to test the right rear diverter. Please
> help.
> Thanks.
>

 

[Adi]

Archived from groups: rec.games.pinball (More info?)

See the big white button that the coin door pushes in when closed? When coin
door is open, it cuts the power to the certain HV things on playfield. Open
door go te tests, push the button and hold it while testing. Then, it will
"react".
Adi
www.txpinball.com

"Natty" <oldefortpub@hotmail.com> wrote in message
news:1122665867.822887.234720@f14g2000cwb.googlegroups.com...
> Hi,
> When I enter test mode in Road Show the manual says that when testing
> each solenoid or switch that when I get to that number in the test that
> that particular piece of equipment should react. I put it in "running"
> mode, start and stop mode but nothing ever pulses. How do I get them
> to test? I particularly want to test the right rear diverter. Please
> help.
> Thanks.
>