Upgrade of memory

[Guest]

Archived from groups: microsoft.public.windowsxp.general (More info?)

I want upgrade memory (existing is 128MB) in PIII 866MHz, to 256MB or more,
to install Windows XP. Can I add 256MB module, so total will be
384MB(128+256)? Or I need use 256MB module only? Or 2 x 256=512MB?

Motherboard info:

Mainboard model CT-6OJV2
VGA Model Embedded 3D AGP VGA
Intel 815E GMCH + ICH2 AGPset with integr. 2D/3D graphics
CPU Type: Pentium III 866MHz
BIOS: Award BIOS
Memory modules: 128MB DIMM

This board can support up to a Celeron 1.1 or a PIII 1.13 max.
256 PC 133 DIMMs are the max that can be used per slot on this board.
----------------------

So what memory is suitable?

Thanks

 

[Guest]

Archived from groups: microsoft.public.windowsxp.general (More info?)

According to Crucial your board will hold 512 Mbs of ram Total Looks like 1
256 and 2 128

check here
http://137.201.245.23/gsa/store/listparts.asp?model=CT%2D6OJV2&tabid=CR

"luminore" <luminor@luminor.com> wrote in message
news:%23pbOkxisFHA.788@TK2MSFTNGP09.phx.gbl...
> I want upgrade memory (existing is 128MB) in PIII 866MHz, to 256MB or
> more, to install Windows XP. Can I add 256MB module, so total will be
> 384MB(128+256)? Or I need use 256MB module only? Or 2 x 256=512MB?
>
> Motherboard info:
>
> Mainboard model CT-6OJV2
> VGA Model Embedded 3D AGP VGA
> Intel 815E GMCH + ICH2 AGPset with integr. 2D/3D graphics
> CPU Type: Pentium III 866MHz
> BIOS: Award BIOS
> Memory modules: 128MB DIMM
>
> This board can support up to a Celeron 1.1 or a PIII 1.13 max.
> 256 PC 133 DIMMs are the max that can be used per slot on this board.
> ----------------------
>
> So what memory is suitable?
>
> Thanks
>
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.general (More info?)

"Keith AH" <Somebody@somewher.com> wrote in message
news:eLnTRBjsFHA.1032@TK2MSFTNGP12.phx.gbl...
> According to Crucial your board will hold 512 Mbs of ram Total Looks like
> 1 256 and 2 128
>
> check here
> http://137.201.245.23/gsa/store/listparts.asp?model=CT%2D6OJV2&tabid=CR
>
> "luminore" <luminor@luminor.com> wrote in message
> news:%23pbOkxisFHA.788@TK2MSFTNGP09.phx.gbl...
>> I want upgrade memory (existing is 128MB) in PIII 866MHz, to 256MB or
>> more, to install Windows XP. Can I add 256MB module, so total will be
>> 384MB(128+256)? Or I need use 256MB module only? Or 2 x 256=512MB?
>>
>> Motherboard info:
>>
>> Mainboard model CT-6OJV2
>> VGA Model Embedded 3D AGP VGA
>> Intel 815E GMCH + ICH2 AGPset with integr. 2D/3D graphics
>> CPU Type: Pentium III 866MHz
>> BIOS: Award BIOS
>> Memory modules: 128MB DIMM
>>
>> This board can support up to a Celeron 1.1 or a PIII 1.13 max.
>> 256 PC 133 DIMMs are the max that can be used per slot on this board.
>> ----------------------
>>
>> So what memory is suitable?
>>
>> Thanks
>>
-----------------------------------------
Is the RAM 384MB enough(128+256)?

thank you.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.general (More info?)

You can run WinXP on 128 not well but it will run
FYI the system will only hold 2 double sided and 3 single sided chips


"luminore" <luminor@luminor.com> wrote in message
news:O6qgO3jsFHA.464@TK2MSFTNGP15.phx.gbl...
>
> "Keith AH" <Somebody@somewher.com> wrote in message
> news:eLnTRBjsFHA.1032@TK2MSFTNGP12.phx.gbl...
>> According to Crucial your board will hold 512 Mbs of ram Total Looks like
>> 1 256 and 2 128
>>
>> check here
>> http://137.201.245.23/gsa/store/listparts.asp?model=CT%2D6OJV2&tabid=CR
>>
>> "luminore" <luminor@luminor.com> wrote in message
>> news:%23pbOkxisFHA.788@TK2MSFTNGP09.phx.gbl...
>>> I want upgrade memory (existing is 128MB) in PIII 866MHz, to 256MB or
>>> more, to install Windows XP. Can I add 256MB module, so total will be
>>> 384MB(128+256)? Or I need use 256MB module only? Or 2 x 256=512MB?
>>>
>>> Motherboard info:
>>>
>>> Mainboard model CT-6OJV2
>>> VGA Model Embedded 3D AGP VGA
>>> Intel 815E GMCH + ICH2 AGPset with integr. 2D/3D graphics
>>> CPU Type: Pentium III 866MHz
>>> BIOS: Award BIOS
>>> Memory modules: 128MB DIMM
>>>
>>> This board can support up to a Celeron 1.1 or a PIII 1.13 max.
>>> 256 PC 133 DIMMs are the max that can be used per slot on this board.
>>> ----------------------
>>>
>>> So what memory is suitable?
>>>
>>> Thanks
>>>
> -----------------------------------------
> Is the RAM 384MB enough(128+256)?
>
> thank you.
>