Who sells backglass's made for translights ?? Anyone know ?

[Del]

Archived from groups: rec.games.pinball (More info?)

Hello Group,
Getting ready to start my Gilligans Island project &
I have the translight, But NO glass Do any of the venders here sell
these ??

Thanks for any help !!

Pin-Del,

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

I picked one up from Mayfair at a show...dont know if Steve ships glass
though.

Barry - NY

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Mazzco used to offer a "kit" awhile back.

Comes with all the plastic pieces and a
sheet of the correct tempered glass.

Cheap.

Fred
TX
CARGPB#8
==========================


Del wrote:
> Hello Group,
> Getting ready to start my Gilligans Island project &
> I have the translight, But NO glass Do any of the venders here sell
> these ??

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Go to a hardware store and ask for a piece of 1/8" thick glass, 18-7/8"
x 27".

Measure your translite first, but that's what I use. You might want it
tempered.


-

http://www.myhomegameroom.com


Del wrote:
> Hello Group,
> Getting ready to start my Gilligans Island project &
> I have the translight, But NO glass Do any of the venders here sell
> these ??
>
> Thanks for any help !!
>
> Pin-Del,
>

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Del.
I've done what John has suggested several times. Just remember to have
them sand the edges or someone could really cut them self's badly on the
sharp edges. I know this first hand (no pun intended).

Dave

John Wart, jr wrote:
> Go to a hardware store and ask for a piece of 1/8" thick glass, 18-7/8"
> x 27".
>
> Measure your translite first, but that's what I use. You might want it
> tempered.
>
>
> -
>
> http://www.myhomegameroom.com
>
>
> Del wrote:
>
>> Hello Group,
>> Getting ready to start my Gilligans Island project &
>> I have the translight, But NO glass Do any of the venders here sell
>> these ??
>> Thanks for any help !!
>>
>> Pin-Del,
>>

 

[Del]

Archived from groups: rec.games.pinball (More info?)

Thanks Guys !!
I'm going to do what John & Dave said & see how it turns
out,, & Dave I hate those glass cuts as much as the next guy =)

Thanks Again !
Pin-Del,