"missing ball" on tales from the crypt, switches is replac..

[Guest]

Archived from groups: rec.games.pinball (More info?)

Still got problems.

I get the 6 ball is missing error.

The first switch (Tough #1 left) doesnt get any power/connects.


If i check the CN10 and connect them to CN8 all work execpt CN10-9, and
this is the Tough 1 left switch..

So my "problem" is with CN10-9...but i got no clue on what to check
next

Any suggestions?

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

If the switch is working ( wires off, check with an ohm meter ) then suspect
a problem on your switch matrix. Check this in your manual. Switches are on
rows and columns. Check other switches on the same row or column for a
broken wire. A wire breaks or poor connection and other switches may not
work. Or you can check continuity from the switch wires back to the board
and see if you have continuity. LTG

<gambit@spray.se> wrote in message
news:1123329315.954731.234220@z14g2000cwz.googlegroups.com...
> Still got problems.
>
> I get the 6 ball is missing error.
>
> The first switch (Tough #1 left) doesnt get any power/connects.
>
>
> If i check the CN10 and connect them to CN8 all work execpt CN10-9, and
> this is the Tough 1 left switch..
>
> So my "problem" is with CN10-9...but i got no clue on what to check
> next
>
> Any suggestions?
>