Search
Sign in with
Sign up | Sign in
Solved

How to change dynamic hard-disk to basic hard-disk

Last response: in Windows 7
Share
Register or log in to remove
Related ressources
Ask the community

Best solution

I heard there is a way changing the Hex data by WinHex, and then you could back to basic disk. But depends on what volumes you have, you may need to adjust it before you convert the disk. like spanned, raid0, raid5 volumes. These volume could not be convert through this way. If you do not want data loss, you have to pay for some money changing the dynamic disk back to basic disk. here is a "dynamic disk converter" from Aomei Tech who possess Partition Assistant. It is just a converter, so it is much cheaper.
Windows 7 Expert

moez_69 said:
If you have no idea ,why are you reply?Idiot.

They may of actually not known what you had been talking about. Some users did not think DYNAMIC right away. That post also with notify that users of other posts so maybe for future reference, they would know what users are asking. Cut them a little slack please(they had help countless users with problems here).

Back on topic.

Did you get your self all fixed up? What did you end up using/doing?

You did not state whether this system already has data on it.

If the system contains data you wish to save, then I would back it up to start.


Then take a look at the following links for more info:

Change a dynamic disk back to a basic disk
http://technet.microsoft.com/en-us/library/cc776315(v=WS.10).aspx

Dual-booting?
http://social.technet.microsoft.com/Forums/en-US/W8ITPr...

Dual Booting on Two Separate Drives
http://social.technet.microsoft.com/Forums/en-US/w7itpr...

Good luck.
Register or log in to remove
Ask the community
Read discussions in other Windows 7 categories
!