Pentium3 SECC Question...

I think the clips are bit different from SECC to SECC2.

SECC2 coolers have 4 pins that stick through the CPU card, all the way to the back, where it's clipped. SECC uses no pins, but instead you can either screw it to 4 holes in the heat spreader or clip it to four rectangular slots.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

So, then if I get a complete SECC2 package, it should install in the board and work? I am not too concerned as to how it looks....

Yes, complete package meaning with SECC2 style cooler.

Some OLD boards used SECC "only" CPU stands, and had to be changed over to "Universal" stands to clip the thing in. But the CPU works even without clipping it down...it would however fall out if the machine was handled the slightest bit roughly.

You should have universal stands on your newer machine. If you need some, I'll sell you a pair for $5 including shipping (which is really $1.15 since priority mail is $3.85).

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

Thanks Crash. I think Ill get the secc2 setup and see if it works, if not Ill take you up on those clamps. Paypal?

Yes, I take paypal. I'd be surprised if your brackets didn't have provisions for SECC2, but if they don't, just get back to the new, surprised Crashman.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

really you should use 2 cpus with the same stepping so check that. in all honesty if you ever plan to upgrade to 2 cpu's you should just get them both when u buy the server as now it may be hard to find the right processor.

Well, if I purchase the identical P3 wouldnt the stepping be the same? It should be the same chip I thouhgt, just different style holder.

Just had an idea. What if I get a socket 370 to Slot 1 adapter?? Should that work?