Tech: BSD Diverter help...

[dd]

Archived from groups: rec.games.pinball (More info?)

Just shopped out my BSD but forgot how to re-install the top ramp
diverter. Does anyone have a picture they can send me on top of the
playfield and under? Thanks....

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

http://mrhide.pinnesota.org/gallery/bsd

 

[dd]

Archived from groups: rec.games.pinball (More info?)

Thanks guys, would you also know what the shooter coil number is? Will
a A-15943 work?

 

[dd]

Archived from groups: rec.games.pinball (More info?)

Will do, thanks again.

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

I'll send you two pictures, but it's not hard. Diverter is on a rod, goes
through the ramp through the playfield, one set screw down below secures the
collar to the rod, the rod will have a flat spot, or at least an area where
the screw left a mark from before. LTG

"dd" <armandb@sbcglobal.net> wrote in message
news:1124414311.777648.73720@o13g2000cwo.googlegroups.com...
> Just shopped out my BSD but forgot how to re-install the top ramp
> diverter. Does anyone have a picture they can send me on top of the
> playfield and under? Thanks....
>

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

AE - 23- 800 is the shooter coil. Don't know what a A-15943 is so I
wouldn't try that. LTG

"dd" <armandb@sbcglobal.net> wrote in message
news:1124419542.720945.85580@z14g2000cwz.googlegroups.com...
> Thanks guys, would you also know what the shooter coil number is? Will
> a A-15943 work?
>

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

The knocker is a A-23-800, if you need a coil you could disconnect the
knocker until you can order one and use that for the shooter. LTG

"Lloyd Olson" <ltg@ssbilliards.com> wrote in message
news:JfydnY_Y1fRT15jeRVnyrw@skypoint.com...
> AE - 23- 800 is the shooter coil. Don't know what a A-15943 is so I
> wouldn't try that. LTG
>
> "dd" <armandb@sbcglobal.net> wrote in message
> news:1124419542.720945.85580@z14g2000cwz.googlegroups.com...
> > Thanks guys, would you also know what the shooter coil number is? Will
> > a A-15943 work?
> >
>
>