Help for my Pinball Magic

Archived from groups: rec.games.pinball (More info?)

Hi.
Yes I bought the PM I earlier asked about (thanx for all the comments:-)

Anyway:
I wonder about some flipperrelated stuff:

# The EOS sitches are not working...they are in possition but it seems like
something is broken from the crankarm, like a missing part or something.
If I move the flipper, the EOS-switch is not reached by anything to
open/close it.
Are they supposed to be open or closed when the flipper is down (not
activated)...cant see or read anything about it in the manual.
Any close up picture on this would help me a lot, knowing any out here?

# Are any WMS parts compatible with the flipperparts, like coilstop,
coilsleeve, crankarm, link/plunger...?

# The "stagedoors" are open sometimes while playing, when I use the
flippers??

Any help on the questions above is highly appreciated:-)

Thanx
/Stefan Ljungström

(Yes the CFTBL-speeker mod is finished including detailed photos, just need
some more time to get it on my site...)

Archived from groups: rec.games.pinball (More info?)

Hi.
Well I have "the big williams style spring" that surrounds the
plunger...maybe the operator put it this way because of the broken
crankarm...How can I possible restore this to original?
Any clue where I can find a krankarm that both activate the EOS and holds
the litte returnspring?
Again:
Anyone having a closeup photo of this?

Thanx

/Stefan Ljungström
<dmerki@charter.net> skrev i meddelandet
news:1124917386.787937.292190@g49g2000cwa.googlegroups.com...
> Coil stops are 25$ and until BBB is done may be in short supply from
> IPB. Links can be used from Williams games as well as the sleeves. The
> bushings are very similar to the Stern ones but I do not know that they
> will work for a fact. The EOS switches are normally open and are moved
> by the piece that the return spring is on. It was probably left off at
> one point. A note on the flippers:
> the wood screws that hold the flipper base plate are DIFFERENT lenghts
> from the side screws and WILL go thru the PF if installed in the wrong
> spot. The optos for the doors may have cracks in the joints to cause
> the false activation. Also remember Cliify's enlightenment on how the
> PF pulls out to work on it. Very nice. Enjoy!!! Don
>