Archived from groups: comp.sys.palmtops.pilot (More info?)
On Fri, 17 Dec 2004 00:43:33 GMT, Jim Anderson
<fro2750@frontiernet.my_finger.net> removed the duct tape and
proclaimed:
>On Fri, 17 Dec 2004 00:26:35 GMT, Norm had this to say...
>
>
>> I want to move Docs to GO from my Treo 650 to the SD card and run the
>> program from the SD card. How is this done?
>>
>>
>>
>
>It is in ROM isn't it?
If it is, you are stuck, until Brayder releases a version of JackFlash
that works on the 650. I have my fingers crossed, though, because I am
considering the 650.
Archived from groups: comp.sys.palmtops.pilot (More info?)
Norm,
Dataviz has a utility that will move most of Docs to Go to the SD card.
Some of it has to stay in RAM. The utility is called DXTG Tech Tool. This
link to the Dataviz knowledge base has the utility about halfway down the
page. http://support.dataviz.com/support [...] 5&pid=2000 Zane
Norm wrote:
> I want to move Docs to GO from my Treo 650 to the SD card and run the
> program from the SD card. How is this done?
Archived from groups: comp.sys.palmtops.pilot (More info?)
"Zane Vandiver" <zvan@sbcglobal.net> wrote in message
newsNKwd.272$F67.226@newssvr12.news.prodigy.com...
> Norm,
> Dataviz has a utility that will move most of Docs to Go to the SD
card.
> Some of it has to stay in RAM. The utility is called DXTG Tech Tool.
This
> link to the Dataviz knowledge base has the utility about halfway down
the
> page. http://support.dataviz.com/support [...] 5&pid=2000 > Zane
>
> Norm wrote:
>
> > I want to move Docs to GO from my Treo 650 to the SD card and run
the
> > program from the SD card. How is this done?
>
>
Hey! That's top-posting!
Please put your answers below the text you are responding to...
--
Mabden
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.