Trying again...Anyone help???

Archived from groups: rec.games.pinball (More info?)

The part number for the USA version
in the manual is 515-5153-00-06.

I doubt the number will do much good,
though. I would suggest trying to find
a used on from a WMS game of the same
era, and adapting it. Trouble with the
DE games of that time is that the audio
adjustment pot is located in it as well.

It has three sets of wires coming out od
the top, a fuse holder, and a long shaft
volume pot.


Fred
TX
CARGPB#8
==========================================
tomvd1@comcast.net wrote:
> I have a Robocop project that needs the power input box. Does anyone
> have one of these for sale or could someone who owns one, please check
> the manual for the part number. It's the box that the power cord and
> on/off switch connect to. Thanks.

Archived from groups: rec.games.pinball (More info?)

Does anyone know if a JP power input box work? I have the power input
box for the JP, but I am not sure of the differences between Robocop
and JP.

The part numbers for Robocop are 515-5153-00-06 for the power input box
assembly, 180-5001-00 for the switch and 123-5000-00 for the volume
control.

For the JP, but the part numbers are 515-5360-00, 180-5001-00 and
123-5000-02 for the volume control.

The box I have is an overseas version, so the fuse and presumably the
MOV (does DE have this?) would need changing.

Just trying to be helpful, and interested in the differences.

Paul

Archived from groups: rec.games.pinball (More info?)

AsiaPinball wrote:
> Does anyone know if a JP power input box work? I have the power input
> box for the JP, but I am not sure of the differences between Robocop
> and JP.
>
> The part numbers for Robocop are 515-5153-00-06 for the power input box
> assembly, 180-5001-00 for the switch and 123-5000-00 for the volume
> control.
>
> For the JP, but the part numbers are 515-5360-00, 180-5001-00 and
> 123-5000-02 for the volume control.
>
> The box I have is an overseas version, so the fuse and presumably the
> MOV (does DE have this?) would need changing.
>
> Just trying to be helpful, and interested in the differences.
>
> Paul

Thank you very much, both Fred and Paul. At least it's a start. I'm
dead in the water without it.

Tom