Sign in with
Sign up | Sign in
Your question

weak ball eject on Embryon

Tags:
  • Games
  • Video Games
Last response: in Video Games
Share
August 30, 2005 5:40:06 PM

Archived from groups: rec.games.pinball (More info?)

My lovely Embryon has trouble pushing the ball over the hump to the
shooter. It goes OK at first, then after playing a little while it
just can't make it. I don't see anything mechanically wrong with the
linear stroke mechanism to fix... anyone have a hint?

thnx

JEB

More about : weak ball eject embryon

Anonymous
August 31, 2005 8:21:29 AM

Archived from groups: rec.games.pinball (More info?)

Check wires to the coil there may be one loose, check voltage vs. other
coils make sure it's similar, make sure the mech operates smoothly,
replace the coil sleeve, clean the plunger with alcohol to get gunk
off, check the spring to make sure it's not too tight, it should offer
very little resistence to the coil.

If you can't get the coil sleeve out easily, replace the coil. Also
make sure the leads from the coil aren't installed upside down and
shorting out against the apron.
Anonymous
August 31, 2005 8:21:59 AM

Archived from groups: rec.games.pinball (More info?)

.....furthur also - transistor that drives this coil might be failing.
!