WTB: Lifting ramp for Whirlwind... Still

G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Looking for a Lifting Ramp Assembly B-13233 for my Whirlwind.


BAA is OOS. Will take NOS, used or repro... Have some parts to trade...
LMK and thanks for the help!

normandie74 _@_ hotmail.com


Andrew
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Would love pictures!!




Thank you for the help!

Andrew
John Robertson wrote:
> On 2005-09-02 21:31:25 -0700, normandie74@hotmail.com said:
>
> > Looking for a Lifting Ramp Assembly B-13233 for my Whirlwind.
> >
> >
> > BAA is OOS. Will take NOS, used or repro... Have some parts to trade...
> > LMK and thanks for the help!
> >
> > normandie74 _@_ hotmail.com
> >
> >
> > Andrew
>
> We are currently making a replacement lift ramp from an old FIRE lift
> ramp. Similar size and can be cut down to fit. The lift is on the same
> side and distance from the flap. Where our old ramp hinge was connected
> to the molded ramp the plastic lip was broken off. I am looking for
> some nice rivets to hold a piece of stainless steel sheet that is being
> formed to look like it belongs...
>
> Perhaps I should take pictures?
>
> John :-#)#
> --
> (Please post followups or tech enquires to the newsgroup) John's
> Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
> www.flippers.com "Old pinballers never die, they
> just flip out."
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

On 2005-09-02 21:31:25 -0700, normandie74@hotmail.com said:

> Looking for a Lifting Ramp Assembly B-13233 for my Whirlwind.
>
>
> BAA is OOS. Will take NOS, used or repro... Have some parts to trade...
> LMK and thanks for the help!
>
> normandie74 _@_ hotmail.com
>
>
> Andrew

We are currently making a replacement lift ramp from an old FIRE lift
ramp. Similar size and can be cut down to fit. The lift is on the same
side and distance from the flap. Where our old ramp hinge was connected
to the molded ramp the plastic lip was broken off. I am looking for
some nice rivets to hold a piece of stainless steel sheet that is being
formed to look like it belongs...

Perhaps I should take pictures?

John :-#)#
--
(Please post followups or tech enquires to the newsgroup) John's
Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com "Old pinballers never die, they
just flip out."