Solution
You'd need a very expensive custom box to do this. If you are willing to spend money on this, contact a vendor that makes system controllers and see what they have or can make. I'm gussing you'd be spending a few thousand dollars on this.

khzzz

Distinguished
Oct 11, 2011
3
0
18,510
I have a (music / MIDI) controller that uses a 25pin to send CV/gate (voltage) to control some synths.

Because there is only 16 CV and 8 gate out, I need 2 boxes to be able to switch between configs.
But i want to have the ability to control independently some pins that goes to one box and some to the other box.

As this is not a 25pin used for computer, i'm not sure if such a switch will be easy to find or even exist actually...

But would be VERY HANDY if i could find it!! :bounce: HELP
 
You'd need a very expensive custom box to do this. If you are willing to spend money on this, contact a vendor that makes system controllers and see what they have or can make. I'm gussing you'd be spending a few thousand dollars on this.
 
Solution