WTB: CV metal guide bracket that holds the blue rubber to ..

Archived from groups: rec.games.pinball (More info?)

I also need this part.

-Tim

Archived from groups: rec.games.pinball (More info?)

Add me to this list please.

Archived from groups: rec.games.pinball (More info?)

LStarrASL wrote:
> E-mail me and I will tell you how to make one with Stern parts and I
> will send you pictures.
>
> LStarrASL at Yahoo dot com

That's a really nice offer. I need this part along with the others who
already posted and the many, many others who haven't posted yet so you
might be inundated with e-mail!

If it's possible, please post the instructions here and ask John Wart
to host the pictures at his site. (I'm assuming John will do that b/c
he's made that generous offer many times in the past.) It'll probably
save you lots of time plus it'll be in the Google archives for future
use.

Again, thanks.

-- Jim

Archived from groups: rec.games.pinball (More info?)

Okay, I will do it later...golfing first priority.....

Archived from groups: rec.games.pinball (More info?)

PBR had the blue rubber and the holding screw a while back...

Skeets wrote:
> If someone was brave enough to send me their bracket, (God forbid it gets
> lost in the mail) I may be able to get some of these made. My Brother works
> as a machinist and has always told me he can reproduce anything I give him
> that is made out of metal.
>
> I would need the actual bracket to give to him so he can give it a shot.
>
> Is this piece threaded for the screw? If it is, I'm not sure if he can do
> that, but I am pretty sure he can reproduce the bracket. Might be worth a
> shot if someone is willing to part with their bracket for a bit. Let me
> know.
>
> seventh_foo @ yahoo.com (remove the spaces)
>
>
> Skeets

Archived from groups: rec.games.pinball (More info?)

you can't expect cowboy rednecks to appreciate sophisticated
technology. Maybe if they made a Buck Hunter pinball with a shotgun
as the flipper button. they may try it out.

Archived from groups: rec.games.pinball (More info?)

> My brother is a machinist too. I asked him a while back about making
> parts like ramp flaps or other welded stuff - his answer was "how much
> do you want me to do this" at $80/hour. (You can tell he's not a
> pinball fan - he thinks they're "junk" ).

Heh, My Bro has done some stuff for before, non-pinball related. When he
comes by and looks at my machines, sometimes he makes little comments like,
"See that piece there, I can make that." I am going to give him my Shado*w
wall target and see if he can make me a metal one, he said he would give it
a shot.


Skeets

Archived from groups: rec.games.pinball (More info?)

Skeets wrote:
> You know, the piece that is always missing on CV's (yes I did check the
> bottom of my cab)
>
> PBR says these are NLA.
>
> Anyone have an extra by any chance?
>
> I think the part # is 04-10253-1
>
> any help much appreciated.
>
> Skeets

You know, this might be a job for Cliffy....

Kirb

Archived from groups: rec.games.pinball (More info?)

kirb wrote:
> Skeets wrote:
>
>>You know, the piece that is always missing on CV's (yes I did check the
>>bottom of my cab)
>>
>>PBR says these are NLA.
>>
>>Anyone have an extra by any chance?
>>
>>I think the part # is 04-10253-1
>>
>>any help much appreciated.
>>
>>Skeets
>
>
> You know, this might be a job for Cliffy....
>
> Kirb
>
I made one for a buddies CV not long ago. I didn't make a template
though I think it has a nutsert inserted into it too, no? If so I
don't have that tool so I couldn't make them dead on.
--
Cliffy - CARGPB2
A passion for pinball!
http://www.passionforpinball.com