WTB: Playfield Hinges and other misc Cabinet hardware - Ha..

Archived from groups: rec.games.pinball (More info?)

I am intrested in getting a few used pin parts for my project that I
thought someone might have available from a 1990's era williams/bally
pin.

I am really hoping to find a set (both left and right) of the hinges
that attach to the Playfield locking it in to the cabinet leting it
pivot and slide out.

Here is a picture of what I was hoping for, and a few other parts I am
trying to find:

http://www.caylegeorge.com/parts.jpg

The picture shows:

- a pair of the locking hinge brackets that hold the playfield in to
the cabinet.

- A bracket for the door interlock switch.

- The hardware for the backbox lights wooden board (the hinges, sliding
lock, and the tabs the lock grabs on to)

- The bracket/bar pieces that attach to the underside of the playfield
to help lift the playfield.

Additionally, not in the picture, I am looking to get:

- Three of the wing-nut style bolts that hold the backbox in the
upright position.

If you have parted a machine lately or have some of this stuff laying
around, shoot me a price.

Thank you for your time,

-cAyle

Archived from groups: rec.games.pinball (More info?)

Found a bracket for the coin door interlock switch, still trying to
track down the rest, especially the playfield hinges, thanks.

-cAyle

Archived from groups: rec.games.pinball (More info?)

Awesome, thanks Bryan