Tom's Hardware > Forum > CPU & Components > CPUs > Clawhammer or Newcastle?

Clawhammer or Newcastle?

Forum CPU & Components : CPUs - Clawhammer or Newcastle?

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Cybercraig   01-30-2005 at 08:15:22 PM

It never fails. I fired up a KN8-Neo last night and the A64-3200 came up at 10 X 200 or 2ghz. instead of 11 X 200 or 2.2ghz. Ran the numbers - ADA3200AEP5AP and found that Mo sent me a Clawhammer by accident. Already clocked at 220 mz (2.2ghz) at stock voltage and 35C idle. Keep or squeak? (This combo runs really nice) I'm tempted to just call it good rather than swapping it out.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Add a reply
Sponsored Links
Register or log in to remove.
pat   01-30-2005 at 08:37:40 PM
- 0 +

I would keep it, as AMD clocked the newcastle higher while cutting the cache in half. If your cpu run stable at 2.2, I would keep it, because you now have the clock and the cache...
newcastle has 512 k, you have 1 meg

-Always put the blame on you first, then on the hardware !!!

Reply to pat
Cybercraig   01-30-2005 at 10:17:18 PM
- 0 +

You're one lucky bastard you know that!?!
___________________________________________________________


I knew that the night the Jensen sisters came over and suggested a Menage' a Trois'. What does not kill you makes you stronger! :lol:

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
endyen   01-31-2005 at 12:50:07 AM
- 0 +

Do a quick run at 2.4. If it's good, keep it. My 3200 has been at 2.45 from day 1. It's a newcastle 754.
Does it have a heat spreader?

Reply to endyen
Cybercraig   01-31-2005 at 03:37:52 AM
- 0 +

Yes it has the heatspreader. I couldn't find one at NewEgg so I ran the numbers at AMD.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
endyen   01-31-2005 at 04:35:00 AM
- 0 +

What's the date on it? If it's a newer chip, you may be in luck. A lot of the older chips could not OC as well. I haven't seen too many clawhammers around lately though.

Reply to endyen
Cybercraig   01-31-2005 at 04:54:43 AM
- 0 +

Second line is CAAKC0334TPMW. I think the date is in there someplace.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
endyen   01-31-2005 at 05:36:13 AM
- 0 +

Yup, wusy is right. Man, that is an old chip. The early ones were not great OCers. They maxed out at about 2.25. Not much joy in that. I would try it, but most likely send it back.

Reply to endyen
Cybercraig   01-31-2005 at 06:20:45 AM
- 0 +

Well I already have all the Overclockers.com beat. Of course their posts are so old that they were all using NF3-150 boards. I'm sitting 2.3ghz at 1.52v. This PC3500 Mosel tops out at 230mhz so I can't push it any higher. I don't think I want to mess with it for another 100mhz and a week or so of wait. If it didn't run so good I might gripe.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
Cybercraig   01-31-2005 at 06:46:27 AM
- 0 +

Yea Wusy, not super-impressive overclocks there either. 2.5ghz looks like the roof. But, for a 754 platform and the memory in it it's doing very well. I'll have to mull it over. The 939 overclocks are getting 2.75ghz nutz! Very tempting!

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
endyen   01-31-2005 at 10:08:05 AM
- 0 +

Well, if the ram is holding you back, set it to 333, and go from there. 2.3 might be a great OC for a clawhammer, but it aint going to touch a newcastle at 2.45. I love to brag about the fact that my cheepo samsung is doing 223 no problem. With your ram, and cooling you might even get to 230. You gona turn up your nose at a shot at 2.5?

Reply to endyen
Cybercraig   02-01-2005 at 04:23:48 AM
- 0 +

I won't see 2.3 with this puppy! Had to clock back to 2.25 to finish Aquamark3. Only beat my XP-3000+ by 2,000 with the same 9600XT card. Not real impressive.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
Cybercraig   02-01-2005 at 05:22:46 AM
- 0 +

1.5v. Turned it up to 1.6v without much change in temps.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
Cybercraig   02-01-2005 at 07:10:57 AM
- 0 +

LOL! I don't think that rule of thumb applies! I think 1.75 is as much as I ever wanted to stuff an XP. Hence the pop to 1.6v on the clawhammer. I'll play some more with it later. I'm not sure 1.7v is going to help it.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
Cybercraig   02-01-2005 at 07:24:52 AM
- 0 +

Well I have to decide tomorrow as Mo will trade me a 2.2ghz Newcastle if I want it. Decisions, decisions!

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
Cybercraig   02-01-2005 at 04:09:28 PM
- 0 +

For more clock with the PC-3500 ram. The only problem is that I've heard the 1mb cache is better for 64bit apps. I'm not looking forward to swapping it as it has the big 7000Cu Zalman that is kind of a pain to mount.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

Reply to Cybercraig
Ask the community Add a reply
Tom's Hardware > Forum > CPU & Components > CPUs > Clawhammer or Newcastle?
Go to:

There are 1231 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.199 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them