Tech: Fuse 114-115 blowing on ToM

[Max]

Archived from groups: rec.games.pinball (More info?)

Machine was working then shipped it via NAVL and now fuse 114 & 115
blow when turned on and message ready check fuse 114/115. Since
everything worked fine before shipping what would be the "obvious"
culprit?

 

[otto]

Archived from groups: rec.games.pinball (More info?)

http://marvin3m.com/wpc/index1.htm#f114f115


--
Otto

CARGPB11

My web page: http://home.bellsouth.net/p/PWP-Ottoslanding

"Max" <doug@pattoncentral.com> wrote in message
news:1126711320.774613.242590@o13g2000cwo.googlegroups.com...
> Machine was working then shipped it via NAVL and now fuse 114 & 115
> blow when turned on and message ready check fuse 114/115. Since
> everything worked fine before shipping what would be the "obvious"
> culprit?
>

 

[otto]

Archived from groups: rec.games.pinball (More info?)

http://marvin3m.com/wpc/index1.htm#f114f115




Otto

CARGPB11

My web page: http://home.bellsouth.net/p/PWP-Ottoslanding

"Max" <doug@pattoncentral.com> wrote in message
news:1126711320.774613.242590@o13g2000cwo.googlegroups.com...
> Machine was working then shipped it via NAVL and now fuse 114 & 115
> blow when turned on and message ready check fuse 114/115. Since
> everything worked fine before shipping what would be the "obvious"
> culprit?
>

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Check your manual, see what line fuse 114/115 protects. Unplug that line
from the solenoid driver board. If you blow the fuse again - you most likely
have a shorted bridge rectifier on the solenoid driver board. If the fuse
doesn't blow, then you have a short out on the line you unplugged. LTG

"Max" <doug@pattoncentral.com> wrote in message
news:1126711320.774613.242590@o13g2000cwo.googlegroups.com...
> Machine was working then shipped it via NAVL and now fuse 114 & 115
> blow when turned on and message ready check fuse 114/115. Since
> everything worked fine before shipping what would be the "obvious"
> culprit?
>