but the benchmarks didn`t seem to indicate any benefit
i`m not too sure the oc was successful. i used 3dmarks 05
how should i benchmark this cpu?
and i also got to about 44-46 c is this an ok temp to be at?
are you going to bark all day little doggie?
or are you going to bite?
Try 01, or Sandra. Even the cpu score in 03 will tell you something. Since your temps went up, I am pretty sure you didn't try to go to a higher multiplier. Good, cause that wont work. You set your FSB to 240 right? Is your memory running in sync? If so, your system will outperform a 3800 by a couple of %.
3D mark 05 is strictly a graphics benchmark. It wont show any change until you drop down to about an xp.
i used the asus ai utility to oc and yes it increased the fsb to 240 but i didn`t see any cpu increase
i guess my memory timings if 2225 are too aggressive for this speed.
are you going to bark all day little doggie?
or are you going to bite?
LOL, the AI utility, OK. Well, your RAM is probably running asynchronously at 4/5 CPU bus clock, which would be DDR384. Who knows what else "overclocking for dummies" backed off on.
<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
well i updated the MB bios
and i will reinstall the ai nos utility and try to oc again
i have a feeling it did not install correctly the first time
i do not have much faith in asus programs the others that came with the board seem to be of low quality for instance the bios update utility couldn`t find the correct server to download even after dozens of attempts.
i think i will have to manually increase the fsb myself
but first i will re-read the faq
are you going to bark all day little doggie?
or are you going to bite?
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.