Sysytem won't boot

[saintsfleur]

Hi guys..

Today i restarted my p.c after updating the windows 7 ultimate 64 bit.. but after i restarted it, suddenly the screen went black and this was displayed:

"JLPRF is compressed
Press ctrl+alt+delete to restart"

i followed the command, and every time i did, the p.c restarted and the same message was displayed... i even check the cables,ram and other connection but every thing was fine.. I tried installing the windows again using the DVD, but no use.. The same message was displayed over and over again every time i restarted the rig.. (I never altered any bios setting)

Kindly help me out to sort this problem..

[p.s: system specs:
i5-2500k
dh61ww mobo
8gb ram]

Thank u

 

[hedwar2011]

Hi guys..

Today i restarted my p.c after updating the windows 7 ultimate 64 bit.. but after i restarted it, suddenly the screen went black and this was displayed:

"JLPRF us compressed
Press ctrl+alt+delete to restart"

i followed the command, and every time i did, the p.c restarted and the same message was displayed... i even check the cables,ram and other connection but every thing was fine.. I tried installing the windows again using the DVD, but no use.. The same message was displayed over and over again every time i restarted the rig.. (I never altered any bios setting)

Kindly help me out to sort this problem..

[p.s: system specs:
i5-2500k
dh61ww mobo
8gb ram]

Thank u

A quick google search doesn't reveal anything promising for JLPRF us compressed Press ctrl+alt+delete to restart .
I also went ahead and tried JLPRF is compressed with no luck either.

I'm assuming this is on a black screen with white text?

EDIT:
Have you attempted to go into Safe Mode or last known good configuration?
Is there any external devices connected?

 

[saintsfleur]

yes absolutely.. black screen, white text

 

[saintsfleur]

how can i go into the safe mode if the p.c is not booting up... ???
no external device is connected

 

[hedwar2011]

how can i go into the safe mode if the p.c is not booting up... ???
no external device is connected

Do you see the BIOS splash screen at all?

If so, right when it comes up start pressing F8 on the keyboard.

If it is not even getting the BIOS splash screen then there may potentially be a DOA part involved.

 

[Skippy27]

wipe the drive completely by doing a format and try to install again.

Also, be sure you dont have anything else that is bootable connected to the machine.

 

[bogdansv]

I suspect the disk is commpressed so you could try this solution from HP.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00220758

Read the whole solution provided on that thread.

PS: You can use the windows 7 dvd to get to a coomand prompt. You don't actually need the HP Recovery CD to get to a command prompt.