Sign in with
Sign up | Sign in

Increase FSB and decrease mutliplier?

Last response: in CPUs
Share

For some reason when I raise the FSB up to above 270MHz the hard drive won't work correctly. But I can put it to 300MHz and it will run fine at 2.8GHz. I guess something to do with the PCI-Clock?

Anyways, the multiplier on my 3000+ Venice is 9x. If I put it down to like 8x and keep the FSB at 300MHz will I be ok. I don't want to destroy the memory controller or anything by chance. My biggest worry is damaging something by the FSB being 100MHz above normal.

Thx!

Wusy if you tell me what stock numbers are for this system I will give you an estimation of where that PCIe frequency would be floating on an ASUS or an ABIT. It will probably be the correct range for this board also. Keep in mind i dont know what the stock numbers are for AMD.

Intel P4 550(3.4)@<font color=green>5Ghz</font color=green>
Asus P5AD2-E-Premium
Crucial Ballistix DDR2 667@<font color=red>DDR2 800<font color=red> make that <font color=red>DDR2 855 VALIDATED!<font color=red>Owned!
TT 680W PSU
Ask the community
!