Bally El Toro issue - any advice? THANKS!

G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Hi folks, I have an old Bally El Toro EM game. It gets played once a week at
most.

Recently it just wouldn't turn on.

I flip the power switch, push in the left flipper button and it would always
turn on. Now... nothing.

I checked the switch and all the fuses but they are fine.

Where should I go from here? thanks!

-Don
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

Did you try coining up, (the coin switch(s)), ?

Might just be a set of dirty contacts.

Fred
TX
CARGPB#8
==================================

D Hopkin wrote:
> Hi folks, I have an old Bally El Toro EM game. It gets played once a week at
> most.
>
> Recently it just wouldn't turn on.
>
> I flip the power switch, push in the left flipper button and it would always
> turn on. Now... nothing.
>
> I checked the switch and all the fuses but they are fine.
>
> Where should I go from here? thanks!
 
G

Guest

Guest
Archived from groups: rec.games.pinball (More info?)

it should have a "lock" relay.

it turns on when you push the flipper button and it turns the game on.

not hard to find cuz it is always burnt.

look in the bottom of the cab for a relay with a coil that looks
brown/black when you find it push on the latch plate and hold. the game
should come on.

if it does then you just have to check if the lock relay coil is bad or
it may not be getting power.

john

www.kansascitypinball.com