Tom's Hardware > Forum > CPU & Components > CPUs > CPU Changeout P4

CPU Changeout P4

Forum CPU & Components : CPUs - CPU Changeout P4

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
MikeRP   07-15-2005 at 04:37:24 PM

OK Guys:

I know AMD is the best and I just built a hot new AMD 64 machine. So I love them.

But, I have a P4 Prescott with the 925 chipset from Dell. Yes Dell, I'll never buy another one after lurking here!

Anyway, I want to upgrade the processor to at least the 6xx series. Which one would be best and who should I look to to buy one?

I'm guessing I can't go Dual Core on this board. Is that so?

Can I put any 6xx series in this motherboard? Can I use the standard Dell heat sink?

THanks for the info.

Mike

Add a reply
Sponsored Links
Register or log in to remove.
sixscrews   07-15-2005 at 07:02:38 PM
- 0 +

Why do you want to change the CPU?

IMHO changing CPUs is not very cost effective, especially in a Dell, primarily due to the number of proprietary parts they use - heat sinks, sockets, etc. I usually strip the unit of memory and add-on cards, chuck the mobo and put in a new one with a new processor. I have bashed a number of older Dimensions for friends, putting in MSI or Asus mobos with AMD processors. Sometimes takes some work with a drill and a run through my stand-off collection but the results are satisfying - it looks like a Dell but is sure as hell doesn't act like a Dell...

ss

If you are determined to go through with it, be sure you have a socketed CPU and that the heat sink is not connected to the motherboard/case in some strange way.

International L120 3/4 ton
Silver Diamond w/Carter YF
Radio, Heater & Gun Rack

Reply to sixscrews
Anonymous   07-15-2005 at 07:51:39 PM
- 0 +

What CPu it has right now?
And just buy the retail version, it comes with its own heatsink.

As mention check out the HeatSink retention mechanism see if its standard. Also try temoving the old cpu ebfor buyinh another one, just in case its soldered or anything

Asus P4P800DX, P4C 2.6ghz@3.25ghz, 2X512 OCZ PC4000 3-4-4-8, MSI 6800Ultra stock, 2X30gig Raid0

Reply to Anonymous
MikeRP   07-15-2005 at 09:52:52 PM
- 0 +

I think you are right, I can get a new 939 motherboard and a 3200 AMD 64 processor for less than 6xx series P4.

Go figure.........

THanks

Mike

Reply to MikeRP
Crashman   07-16-2005 at 10:06:13 AM
- 0 +

If it's a Socket 775 processor, it should accept any Socket 775 800 bus non-dual Prescott, and the Dell cooler is probably good enough.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

Reply to Crashman
Ask the community Add a reply
Tom's Hardware > Forum > CPU & Components > CPUs > CPU Changeout P4
Go to:

There are 589 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.307 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them
How do I win badges?