grand lizard TECH HELP!!

[Guest]

Archived from groups: rec.games.pinball (More info?)

THE GAME is starting and registering the first ball when it
drains . but after the second drains it does not find it . and
sometimes i have to lift the playfield up to at a tilt to get the
start button to activate sometimes kicking out a ball and sometimes
not . and the multiball will load and go into mode but not shoot out
.. please help !! STEVE

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

check the switches 12,13,14 ball trough switches from the ball
feeder
if one switch is bad game does not know where are the balls !!!!!
also the outhole swich 10 ,,,,,,,,,in switch test mode

Marius
www.pinball.ro

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Pinfantasynyc,

If the number of ball in your game are correct, and the switches under
your trough work correctly, the next thing to check is the
anti-kickback wire in the trough.

The wire is a one-way gate that keeps the balls moving forward towards
the launch. Sometimes this wire breaks and causes problems like you've
seen.

--
PinTed


pinfantasynyc wrote:
> THE GAME is starting and registering the first ball when it
> drains . but after the second drains it does not find it . and
> sometimes i have to lift the playfield up to at a tilt to get the
> start button to activate sometimes kicking out a ball and sometimes
> not . and the multiball will load and go into mode but not shoot out
> . please help !! STEVE

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

Make sure it has the right number of balls inside the game. 3 or 4, not
sure. I'm guessing 3?
Awesome pin. Like a cross between High Speed and Congo and Jungle Lord.
There was one for sale here locally. Might still be for sale here in VA.
Contact Mark
Contact at mtwenterprises@comcast.net
Shop 804-779-0212
Cell 804-519-2770 (day)


Josh
http://www.pingeek.com
Pinball dvds for sale online and at The York Show, 10/7 - 10/8,
http://www.theyorkshow.com


"pinfantasynyc" <rockfantasyman@pioneeris.net> wrote in message
news:1127481248.877428.238620@f14g2000cwb.googlegroups.com...
>
>
> THE GAME is starting and registering the first ball when it
> drains . but after the second drains it does not find it . and
> sometimes i have to lift the playfield up to at a tilt to get the
> start button to activate sometimes kicking out a ball and sometimes
> not . and the multiball will load and go into mode but not shoot out
> . please help !! STEVE
>