you offered advice on my setup 2weeks ago. I got the new
600cel cCO and I will have time to install this weekend.
The question I have is that as of this time I have NOT installed the "SS-bios", should I flash it first without the cel or set the cel in the slotket and flash it together??????????
WHAT CHANGES SHOULD I MAKE TO YOUR ADVICE BELOW???????
"Leave all the jumpers on your slotket set to auto, make sure the jumper that selects the kind of CPU is set for the celeron not for the PIII(Copermine).
Since you are using the latest bios already, just drop the slotket in with cpu and cooler on, and boot. Go directly into the bios, make sure voltage is correct (1.7v). Turn off speed hold error, change AGP divider to 2/3 (AGP/CLK).
2/3 = 2x's mode
1/1 = 1x's mode
Here is a link to bios tips http://bxboards.com/biostips.shtml
You should be able to change your fsb directly to 100, and boot. My bro just got the 600 cC0, same setup as mine and yours,, booted right to 900 default voltage. He is up to 928 now @ 1.75v. He has not tried to go higher, but it should no prob.
If you need further settings, reply back and I can give them to you. Also, if you are having probs, list your entire system specs pls.
Dohhh!!!"
600cel cCO and I will have time to install this weekend.
The question I have is that as of this time I have NOT installed the "SS-bios", should I flash it first without the cel or set the cel in the slotket and flash it together??????????
WHAT CHANGES SHOULD I MAKE TO YOUR ADVICE BELOW???????
"Leave all the jumpers on your slotket set to auto, make sure the jumper that selects the kind of CPU is set for the celeron not for the PIII(Copermine).
Since you are using the latest bios already, just drop the slotket in with cpu and cooler on, and boot. Go directly into the bios, make sure voltage is correct (1.7v). Turn off speed hold error, change AGP divider to 2/3 (AGP/CLK).
2/3 = 2x's mode
1/1 = 1x's mode
Here is a link to bios tips http://bxboards.com/biostips.shtml
You should be able to change your fsb directly to 100, and boot. My bro just got the 600 cC0, same setup as mine and yours,, booted right to 900 default voltage. He is up to 928 now @ 1.75v. He has not tried to go higher, but it should no prob.
If you need further settings, reply back and I can give them to you. Also, if you are having probs, list your entire system specs pls.
Dohhh!!!"
Facebook
Twitter
Instagram