Duron 800 and Gigabyte 7ZM overclockable?

i overclock on a ga-7zx but i trashed my warranty in the procces. as long as you just use thier utility to modify the fsb. you will be fine though you will need to use a trick similiar to unlocking the l1 brdges to up your voltage. my board runs stable at 115 mhz fsb.
if you want to contol the voltage and the multiplier by dipswitches you have to turn the board upside down and remove 9 pins from the socket. the 5 vid and the 4 fid pins.
if you want i can go into more detail later but i don't recommend this except to the most mentally deranged such as myself! because once you go there is no turning back

easytune only adjusts the buss speed.
the reason you crash at 950 is your buss was at 118 or 119 mhz instead of the default 100.
i don't know of any gigabyte boards that let you adjust the multiplier. that is why i took a soldering iron and modified my board. i can only run stable at 115 mhz which is more than most boards can do.

who is more foolish...
the fool, or the fool that takes his advice?