Sign in with
Sign up | Sign in
Your question

BSOD

Last response: in Windows 7
Share
January 11, 2013 3:10:27 PM

Hi, I've had this BSOD problem for a couple of days now, I still haven't found the cause of it, I updated my bios and graphic card driver, done a memtest, no problems showed up, and it's still happening, so if anyone could help me it would be much appreciated.

System spec's :

Gigabyte X58A-UD3R motherboard
Intel Core 7 950
NVIDIA Geforce GTX 680

Whocrashed data :

crash dump file: C:\Windows\Minidump\011113-12838-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002E0F9BC, 0xFFFFF8800928A2D0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.




crash dump file: C:\Windows\Minidump\011113-12963-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x1A (0x41284, 0xFFFFF8A024D19001, 0x12533, 0xFFFFF781C0000000)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



crash dump file: C:\Windows\Minidump\011113-12714-01.dmp
This was probably caused by the following module: dxgmms1.sys (dxgmms1+0x20B7D)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF880053D2B7D, 0xFFFFF880078D5B80, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: DirectX Graphics MMS
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

More about : bsod

January 14, 2013 2:35:16 PM

Any help ?
m
0
l
!