Printing not sycronized with paper, runs off page

[wrjones]

I have a Minolta QMS Magicolor 2300dl with very little use. It is having a problem with print running off the page at the bottom. It seems clear that the print is starting way too low on the page and therefore runs off the bottom. The offset distance can vary from print job to print job even when repeating the same document. I was thinking there may be a factory reset for all switches or some calibration procedure.

 

[PhilFrisbie]

A paper sensor is likely failing or dirty. Try cleaning it out with canned air.

 

[wrjones]

Thanks Phil