G
Guest
Guest
I am having trouble getting this gigabyte motherboard ga-686lx4 to properly recognise my PII 350mhz (100mhz fsb). It has jumper settings for both bus and multiplier for processor's.
When set to 100mhz bus it will recognize as 350mhz but then freezes. on warm-reboot it does nothiing.
When set to 66mhz it recognises it as 233mhz and seems to operate fine, at limited value.
Trying all of different multipliers yields same results. Ideally I would set to 100mhz bus and 3.5 multiplier, but this still freezes system.
I know someone has useed this board out there....
<b>Thanks for your help</b>
When set to 100mhz bus it will recognize as 350mhz but then freezes. on warm-reboot it does nothiing.
When set to 66mhz it recognises it as 233mhz and seems to operate fine, at limited value.
Trying all of different multipliers yields same results. Ideally I would set to 100mhz bus and 3.5 multiplier, but this still freezes system.
I know someone has useed this board out there....
<b>Thanks for your help</b>