HP LaserJet P2055dn Fuser Problem

Sutenvulf

Honorable
Feb 11, 2013
9
0
10,510
Hello, I have a problem with a printer as stated in the title, it's leaving alot of residuel ink on the left and right side of every print, after taking it apart I've found on the Fuser's grey plastic roller there is an excess of ink, is there a way to clean this off as I've tried a damp cloth and it still remains

2ufspch.jpg
 

CCL-LA

Distinguished
Sep 19, 2009
11
0
18,520
Your Telfon fuser sleeve is worn down and the Teflon coating is missing. You will need to either replace the entire fuser assembly or replace the sleeve. You can get both parts from Amazon.com. The fuser sleeve will be much cheaper but will require more installation time because you will need to disassemble the fuser to swap the sleeve. Doing a search for P2055 fuser should pull up both parts so you can check the current pricing and make your decision. If you have any questions about this just let me know in a reply comment.