New computer not working!

[DeViLgunner]

I just finished putting together a new comp but when i turn it on the monitor doesnt turn on and says check signal. I have tried using diffrent video cards but same thing. My setup is as follow:

Iwill KA266-R Motherboard
AMD T-Bird 1.4
Elsa Gladiac Geforce2 GTS 32meg
Sound blaster Live! 5.1
256meg DDR PC-2100 Crucial Ram

I have tried removing the SBlive but it still did not work. The monitor does work i am using it right now on a diffrent computer with a Elsa Gladiac 32meg GTS.

 

[kurokaze]

Any beeps coming out of your computer?
i.e. the vid card may not be seated properly.



Intel Components, AMD Components... all made in Taiwan!

 

[jc14all]

Check your monitor cable at both ends to see if you have any bend or broken pins. Also, if your monitor has a reset button try that.

JC-------<*){{{>{~~~~~
Fisher of men

 

[mbetea]

also too if none of the above work, if you got or get a PCI video card and plug it in. see if it works. when i built this system, 2 weeks later my agp slot was bad.

always with one shoe untied and never finding the other.

 

[DeViLgunner]

Nope no beeps.

 

[Guest]

is the motherbaord grounded properly???

power supply a-ok?

does the fan spin at all when u turn it on??

--call it what you wish, with this machine I can make mercury flow in 3 directions at once--

 

[DeViLgunner]

Yes the motherboard is grounded properly and the power supply works and the heatsink works fine.

 

[kief]

check vid card seating, you should see little if any of the connector if its in right......

Jesus saves, but Mario scores!!!