overclocking duron 1 ghz

[Guest]

If my duron is unlocked is there a problem with running it at 7.5x133 instead of 10x100?

Do you drive to work or take a bag lunch?

 

[Matisaro]

Nope no problem at all.

"The Cash Left In My Pocket,The BEST Benchmark"
No Overclock+stock hsf=GOOD!

 

[girish]

you could quite run it at 8x133 = 1066 without a problem. or even 8.5x133 to get 1100!

girish

<font color=red>Nothing is fool-proof. Fools are Ingenious!</font color=red>

 

[svol]

And if it doesn't want to run at a higher multiplier you can raise the VCore voltage a little to see if that works.
Don't forget to set the PCI bus ratio to 1/4 of the FSB when you run at 133 MHz (133/4=33.3), if your mobo doesn't adjust this automatical.

My case has so many fans that it hovers above the ground .