Heatsink help ???

[Owl]

I'am defecting from AMD/VIA and going for
P 4 2.2mhz ***512kb*** 478
Fic VC15 mobo
3 x 256mb Micron DDR
ATI AIW radeon

My Q
With AMD's I have alway's Used Hedghog's 238 & Wing's all copper with delta's... sq or round fins do not collect dust and dirt ( at work in a Factory ) ie.SK6
as bad as long fin's h/s . BUT I WANT Copper ??? for P4
All i can find are all Al.
come on some one must make a copper or 1/2 copper
H/S for P 4
any help would be great
Thanks......

<font color=blue>**VIA has forced Me to the dark side of INTEL, sorry AMD**</font color=blue>

 

[Raystonn]

I would really recommend going with an Asus P4T-E or Abit TH7II motherboard and some RDRAM. It will give you the best performance. Are you planning on overclocking? If not, the retail heatsink/fan are very nice and will be more than sufficient. In fact, the retail heatsink/fan will probably work well for overclocking as well.

-Raystonn


= The views stated herein are my personal views, and not necessarily the views of my employer. =

 

[Owl]

Ok i'am not afraid of rambus but i will have to eat crow
at work, but that is a good idea more band with.
and back it down to 2 x 256 = 512mb rdram PC800
but all the heat sinks are slots long i need round pins
or sq or hex like old Alpha or silver mounten or hedgehog...
or i have to use 3 cans of air a week....
i have freinds at work that use thin fin fans and there
always pluged i mean in 48 hr,

<font color=blue>**VIA has forced Me to the dark side of INTEL, sorry AMD**</font color=blue>