Sign in with
Sign up | Sign in
Your question

overclocking AMD hammer

Last response: in CPUs
Share
February 28, 2002 4:18:51 AM

do any of you have any info on overclocking the sledge or claw hammer? a link would be good. i'm wondering if there will still be the ability to over clock by mults?

<A HREF="http://www.geocities.com/scamtron2000/Lochel.html" target="_new"> <font color=red>go to my site</font color=red> </A>
February 28, 2002 11:49:30 AM

oh yea, you can alter the multipliers with duct tape and a piece of CAT 5 cable...
I thought everyone knew that...

<i>Better to be silent and thought an idiot than to speak and remove all doubt.</i>
February 28, 2002 1:19:03 PM

Welll...since the current engineering samples apparently only run at half clock, I doubt we'll have much if any news on overclocking until it's released or very close to release. The chip itself can't be modified, so if overclocking is dependent at all on connecting bridges on the chip/cpu itself, that will likely be near to impossible.

However, AMD has stated, recently even, that they intend to continue to encourage/support the *enthusuasts* when discussing overclocking and the like.

Mark-

When all else fails, throw your computer out the window!!!
Related resources
February 28, 2002 3:40:13 PM

<A HREF="http://www.icantbelieve.com/youactually/clicked/onthisl..." target="_new">Here is a page</A> giving every detail needed about unlocking both Clawhammer and Sledgehammer, as well as how far they're expected to overclock.

<font color=orange>Quarter</font color=orange> <font color=blue>Pounder</font color=blue> <font color=orange>Inside</font color=orange>
Don't step in the sarcasm!
February 28, 2002 7:51:29 PM

LOL

--
For the first time, Hookers are hooked on Phonics!!
!