celeron 8*100 & slotkey

[scheichtm]

Hi,

i have tried this with 2 different computers and could not
get this combo to run ? Another Celeron 566 is running fine with same slotkey(same revision).

So what is the point here ?

I have even tried a `dump´ slotkey that only translates to
Slot 1, but that still dont work.

Please help me.

 

[girish]

what sloket do you have? and what board are you running it on? A Celeron 800 MHz has a 100 MHz FSB, your board may not be able to detect the processsor properly. try the latest BIOS update for your board.

girish

<font color=red>Nothing is fool-proof. Fools are Ingenious!</font color=red>

 

[scheichtm]

Its a 370 SP Slotkey and the mainbords are fine.

Its just that this combination 800 + Slotkey doesnt
seem to work at all. Have tried everything, really.

 

[Unolocogringo]

Try raising the detected voltage for your cpu. I have a Asus P2B motherboard that will not boot at anything below 1.8 volts Vcore. Many older boards are like this. My wifes comp ,the p2b. runs a p3 700 fine @1.8 volts but will not do anything at 1.75 volts.

I aint signing nothing!!!

 

[scheichtm]

I had it running in a tusl2-c with 1.85 volts and tried
to start with that on the old mobo, but nothing..

Besides, it has been tested on 2 different mainbords.

I still cant believe that this fine processor cant
be used anymore.