Dell Dim 2400 front panel config (0/2)

Archived from groups: alt.sys.pc-clone.dell (More info?)

Take a look at www.roberthancock.com, which has some of the Dell boards
diagrammed.



"no1@home" <no1@home.com> wrote in message
news:8ip7o0p7557skspq09l26gqihdii55mhdf@4ax.com...
> I'm trying to put a 2400 board in a standard case. the wires in the
> standard case will fit the blue slot, but what i would like to know is
> which one is for power and which one is for lights.
>
> i've included some photo's of what i'm talking about.
> please help.

Archived from groups: alt.sys.pc-clone.dell (More info?)

well hereis what i found out about the pin layout in the 2400.
i've attatched a photo with color code.



On Sat, 30 Oct 2004 19:15:46 -0400, "no1@home" <no1@home.com> wrote:

>i've looked at the site mentioned, and it was somewhat informitive.
>but he didn't have the info on the newer Dimension 2400 series. the
>photo i posted shows a blue square connector, and what i need to know
>is, which pin(s) is for power switch, hd light...ect.
>
>i've been to Dell's web site as well, but was unable to find the info.
>if any one here has a 2400, if you could, pull the cover and see what
>color the wires are and which wire goes to which pin. this should be
>easy to do. i hope.
>
>thanx
>
>On Sat, 30 Oct 2004 20:52:48 GMT, "Edward J. Neth"
><ejn63@netscape.net> wrote:
>
>>Take a look at www.roberthancock.com, which has some of the Dell boards
>>diagrammed.
>>
>>
>>
>>"no1@home" <no1@home.com> wrote in message
>>news:8ip7o0p7557skspq09l26gqihdii55mhdf@4ax.com...
>>> I'm trying to put a 2400 board in a standard case. the wires in the
>>> standard case will fit the blue slot, but what i would like to know is
>>> which one is for power and which one is for lights.
>>>
>>> i've included some photo's of what i'm talking about.
>>> please help.
>>