networking

[Guest]

I am building an new 10/100baseT network with 30 workstations, of which 9 are over 150 mtrs away from (NT/W2K) server. Can apply 2-3 Hubs in serial config. or
Use Wireless Cisco Aironet 350 OR Lucent Orinoco AP1000
Has anyone experience with these options. What is the best ?
Really would be gratefull if anyone could give some advise.

 

[jihiggs]

depending on how much bandwidth they will need, you could just run one drop to a switch half way over to them and run them all off that one switch. but if they really need that speed you can use two drops with 2 switches. if thats not somthing that can be done, you could just run all 9 drops out to them and put a repeater some where in the middle of each. the wireless option would be a headache. if you have the means, the best way would be to put an idf in their area, run fiber between the mdf and idf.

i went to the tomshardware forums and all i got was this lousy signature.