I recently bought a Leadtek WinFast GeForce Ti 4600 and I am using v41.09 of Nvidia's Drivers...My current specs:
Asus M/B (A7V333)
AMD XP 1700
256MB DDR
(I Guess that is all that matters...)
I have all the card's settings set to default and I have have anti-aliasing switched off as well as Anisoptric Filtering. But when I run Medal Of Honor - Spearhead (With all the settings maxed out...) i get an FPS of about 20-30...although it uses the Quake III engine...and from hardware guides that I have read on Tom's Hardware Guide I should be nearly getting 200 FPS...so if someone out there know what is wrong please tell me...O yes and when I run UT 2003 will all the settings maxed out it runs flawlessly with about 70 FPS but that is with 4x Anti-Aliasing and 2x Anisoptric Filtering...
Thanks in Advance
Asus M/B (A7V333)
AMD XP 1700
256MB DDR
(I Guess that is all that matters...)
I have all the card's settings set to default and I have have anti-aliasing switched off as well as Anisoptric Filtering. But when I run Medal Of Honor - Spearhead (With all the settings maxed out...) i get an FPS of about 20-30...although it uses the Quake III engine...and from hardware guides that I have read on Tom's Hardware Guide I should be nearly getting 200 FPS...so if someone out there know what is wrong please tell me...O yes and when I run UT 2003 will all the settings maxed out it runs flawlessly with about 70 FPS but that is with 4x Anti-Aliasing and 2x Anisoptric Filtering...
Thanks in Advance